Questions? Call us: 800-547-1539 | Fax: 800-547-1535 | Contact Us ›
Adding to cart
Visual Display products FREE SHIPPING on qualified Marsh or Best-Rite items totaling over $2,195! See Visual Display category for details. 

Penco Cup for Recessed Locker Handle Assembly, mounting hardware included

Penco Cup for Recessed Locker  Handle Assembly, mounting hardware included
Sku: PN-333H
Price: $9.86
Replacement recessed cup only for the PN3331 recessed handle assembly.
  • Material: brushed stainless steel
  • Thickness: 1/32", 22 gauge
  • Outside height
  • In middle: 5-1/2"
  • At outside corners: 5"
  • Inside height: 4-7/16"
  • Outside width
  • At top: 4"
  • At bottom: 3-7/16"
  • Inside width
  • At top: 3-5/16"
  • At bottom: 2-13/16"
  • Front edge
  • Width
  • Top: 15/32"
  • Sides: 5/16"
  • Bottom
  • In middle: 5/8"
  • At outside corners: 5/16"
  • Depth: 1-3/8"
  • There are two tabs at the top of the cup, which fit into
  • the locker door to hold it in place
  • Width of each: 1/2"
  • Height of each: 1/4"
  • Depth the tab is set back from the front face of the cup
  • At the base of the tab: 3/16"
  • At the top of the tab: 5/32"
  • Tab to tab OC: 2-7/32"
  • Inside distance from tab to tab: 1-3/4"
  • There is a hole at the bottom of the front face for securing
  • the bottom of the cup to the locker with a screw
  • Shape: elongated oval
  • Length: 15/64" (Between 7/32" and 1/4")
  • Height: 11/64" (Between 5/32" and 3/16")
  • Holes for combination lock
  • Qty: 3 each
  • 1 each large holes in the center
  • 2 each small: 1 above and 1 below the large hole
  • Diameter
  • Large hole: 21/32"
  • Small holes: 7/32"
  • Hole to hole OC
  • From small hole to large hole: 1-1/8"
  • From small hole to small hole: 2-3/16"
  • Distance from bottom edge of cup to bottom edge of the bottom
  • mounting screw hole, on the front side of the cup: 7/16"
  • Distance from back edge of lift slot to top edge of top small
  • mounting screw hole, on the front side of the cup: 1-1/16"
  • There is a slot at the top of the cup into which the plastic
  • trigger portion of the PN-333L or PN-333R lift fits
  • Width: 1/2"
  • Length: 1-1/8"
  • Mounting hardware (included)
  • 1 each 8-32 x 3/8" shoulder machine screw. This screw has a
  • special prism cut head (decoration). The shoulder is the
  • same shape as the mounting hole on the lower front face of
  • the housing.
  • 1 each 8-32 nylon locking nut
Customer Reviews
(0.00)
# of Ratings: 0
There are no comments for this product.