Questions? Call us: 800-547-1539 | Fax: 800-547-1535 | Contact Us ›
Adding to cart

Republic Locker Complete Handle Assy, LH, 1965-Present

Republic Locker Complete Handle Assy, LH, 1965-Present
Sku: RS-1106-LH
Price: $8.07
Replacement handle assembly for Repulic Steel lockers. Complete with lift (#RS-1199), housing (#RS-1197) and screws.
  • Material
  • Lift and housing: Zinc die-cast, chrome plated
  • Bumper on lift: Gray, non-marking rubber
  • Lift
  • Height
  • Upper grip (textured half): 15/16"
  • Lower half: 1-5/16"
  • Both parts: 2-1/2"
  • Depth
  • Upper half
  • Including mounting pegs: 1-1/2"
  • Not including mounting pegs: 11/16"
  • Lower half
  • Including mounting pegs: 1-9/32"
  • Not including mounting pegs: 9/16"
  • Thickness
  • Top and back edge: 5/16"
  • Textured grip on upper half: 3/32"
  • Gtip style: 1/16" Concave squares that form a grid
  • There are flat platforms that lay between, and perpendicular to
  • the grip handle and mounting pegs, forming a base and stop
  • for the mounting pegs. The flat platforms butt up against
  • the outside of the door when the handle is in place.
  • The mounting pegs extend back off the platforms, then to the
  • right on a 90o bend and into the side of the lockbar.
  • Platforms
  • Qty: 2 Each, 1 each at the base of each mounting peg
  • Width: 5/16"
  • Length: 9/16"
  • Thickness: 3/32"
  • Mounting pegs
  • Qty: 2 Each
  • Length
  • To center of bend, from the platform: 7/16"
  • From the center of the bend to the tip: 11/32"
  • Height
  • At platform: 3/8"
  • At tips: 5/16"
  • Width: 3/16"
  • Peg to peg OC: 1-1/8"
  • There are two bumpers, one between each platform and the
  • handle portion, which act to keep the lift portion from
  • 'clanging' against the housing as it moves up and down.
  • Width: 9/32"
  • Height: 1/4"
  • Depth: 3/16"
  • Padlock hole dia: 3/8"
  • Housing
  • Thickness: Varies, from 1/32" to 1/8" around the
  • different parts of the housing
  • Height: 3-13/16"
  • Width - wider at the top than the bottom
  • Base - wider in back than in front
  • Front
  • Top: 13/16"
  • Bottom: 9/16"
  • Back
  • Top: 29/32"
  • Bottom: 5/8"
  • Kick-proof hood
  • Front: 15/32"
  • Back, where it joins base: 1/2"
  • Lift slot
  • Width: 13/32"
  • Depth (open top of hood): 1/2"
  • Height (front of base): 7/8"
  • Mounting hole
  • Qty: 2 Each - top hole is exposed, and accessible from
  • the front of the housing, the bottom hole is concealed
  • on the front and accessible only from the back.
  • Dia: 1/8"
  • Hole to hole OC: 2-7/16"
  • Distance to center of top hole from top edge of housing: 5/8"
  • Distance to center of bottom hole from bottom edge of
  • housing: 23/32"
  • Padlock hole dia: 3/8"
  • Mounting hardware (for housing)
  • 2 Each 8-32 X 5/16" Phillips head sems screw
Customer Reviews
(0.00)
# of Ratings: 0
There are no comments for this product.