Quickship
DESCRIPTION
Complete replacement locker lift handle for Penco Vangard lockers. This 2-part locker handles fits Penco Vangard lockers (1967 - present) and comes with the attachment palnut. Everything you need to replace the handle for your Penco Vangard Lockers.
| This is an assembly, which includes | : |
| PN-3388 Housing | |
| PN-3399 Lift | |
| PN-3313 Palnut | |
| Material | : chrome plated Zamak (pot metal) |
| Housing (PN-3388) | |
| Backplate | |
| Height | |
| Including tab at bottom | : 3-11/16" |
| Not including tab | : 3-5/8" |
| Width | |
| At top | : 13/16" |
| At bottom | : 11/16" |
| Tab | |
| Height | : 3/8" |
| Width | : 5/16" |
| Thickness | : 5/32" |
| Projection past bottom edge of backplate | : 3/16" |
| Mounting peg (projects out of the upper back portion | |
| of the backplate and receives a palnut, which helps | |
| hold the housing on the locker door) | |
| Dia | : 3/16" |
| Length | : 1/2" |
| Lift slot | |
| Width | : 5/32" |
| Height | |
| Not including tab at top and bottom of slot | : 5/16" |
| Including tabs | : 1-7/8" |
| Upper front molding is bevelled on all four sides | |
| Width | |
| Where it meets the backplate | : 13/16" |
| At the top of the face | : 11/32" |
| Height | |
| Where it meets the backplate | : 1-3/32" |
| At the top of the face | : 3/4" |
| Lower slot tabs | |
| Width of both tabs and slot | : 5/16" |
| Thickness of each tab | : 1/16" |
| Height | |
| Where it meets the backplate | : 7/16" |
| At the top of the face | : 9/32" |
| Depth | |
| Including backplate | : 13/16" |
| Not including backplate | : 5/8" |
| Padlock hole | |
| Dia | : 5/16" |
| Type | : Countersunk on the outside of each tab slot |
| Lift (PN-3399) | |
| General shape - A straight, flat and wide handle on the front | |
| and top; a flat plate of metal behind and perpendicular to | |
| the face of the handle, with a variety of curves along its | |
| bottom and side edges | |
| Handle | |
| Width | : 7/16" |
| Height | : 1-3/32" |
| Thickness | : 3/32" |
| Top, which has a shape like a short wind bottle - fat at the | |
| bottom, where it meets the side handle, angled down to a | |
| narrow 'neck', which becomes the same thickness as the rest | |
| of the lift. | |
| Width | |
| At front, where it meets the handle | : 7/16" |
| At the back, where it meets the lift | : 1/8" |
| Length | : 3/4" |
| Thickness | : 1/8" |
| Back plate - the curves on the back edge of the left create a tab | |
| and a fork to serve the following purposes | : |
| The tab, located on the back upper part of the lift is shaped | |
| like a finger that is bent to a 'pointing' up position. | |
| When the left is pulled out it pivots downward on the forks | |
| (see below). This finger stops against the locker door, | |
| keeping the lift from pulling all of the way out of the housing | |
| The two-pronged forkshape, rounded at the tips, extends down and | |
| out of the lower section of the lift and fits onto the lockbar, | |
| becoming the pivoting point when the lift is pulled out. | |
| Base of finger bend to fork slot OC | : 1-9/16" |
| Padlock hole dia | : 5/16" |
| Palnut (PN-3390) | |
| Outside dia | : 19/32" |
| Depth | : 1/4" |
| Hole dia | : 7/32" |
| Hex | |
| Width | : 7/16" |
| Thickness | : 1/64" |
| Color | : dark gold |
Questions about Replacement Locker Handle, compatible with Penco Vanguard?
Please contact us with any questions you have about Replacement Locker Handle, compatible with Penco Vanguard and we'll be in touch.
Related Products
Quickship
Quickship
Quickship
Quickship
