Ultra Dog with 7" hook centers for a double door unit w/o mullion
Part Number: AD407
Ultra-Dog is a simple, affordable, non-electric, mechanical door securing device that works! It is the first security product that can eliminate the elephant chains and padlocks and the liability that goes with them! Solves rolling blackout security issues when used with magnetic locking devices. Adds up to 10,000 pounds of physical deterrence to your existing door and hardware in the after-hours environment.
Guarantees secondary egress to firefighters and allows immediate egress with minimum effort and no prior training. Tested and used as a layered device by the DOD and NRC. Protects against hinge cuts and lock cutting charges. Fire Marshall approved in most states.
The AD400 series Ultra-Dog is designed for double outswinging glass/steel doors without mullion, but with an astragal. To order the correct unit for your application, you'll need to measure the hook center distance.
General description: Ultra-Dog with 7" hook centers for a
double door unit without mullion
Weight: 7.4 lbs, ships via UPS
Warranty: Five (5) years from original purchase
Main support pieces, rods, storage hook
and mounting brackets: Steel
Block and handle supports: High impact plastic
Rod cushions: Rubber
Dia: 1" Round
Length between handle brackets: 5-13/16"
Support bar (connects handle, locking rods and blocks
Tubing size: 1" square
Length between blocks: 22-3/4"
Length, from face of support bar to inside of 90o bend: 2-7/8"
Height of hook: 1-3/4"
Hook to hook OC: 7"
There is a rubber tip on the end of each hook
Outside dia: 1/2"
Thickness of rubber: 3/64"
Height, at highest point: 4-9/16"
There is a bolt that runs through the center of each block,
which is used to shorten and lengthen the distance from
the front face of the block from the main support bar,
allowing the Ultra-Dot to fit a range of mullion depths.
Holding brackets - triangular shape, mount to the face of the door
Qty provided: 2 each
Material thickness: 1/8"
Height of back portion: 2-3/4"
Inside width: 1"
Inside depth: 1-1/16"
Dia of holding rod: 3/8"
Hole to hole OC: 1-7/8"
Material thickness: 5/64"
Outside height: 2-1/32"
Inside depth: 1/2"
Dia: 13/64" (between 3/16" and 7/32")
Hole to hole OC: 1/2"
Mounting hardware (included)
- 4 Each 5/16-18 x 2-/4" Carriage bolt
- 4 Each 5/16-18 Hex nut with 1/2" drive
- 4 Each Flat washers, 7/8" OD, 13/32" ID, 5/64" thick
- 2 Each #10 x 3/4" Hex washer head thread forming screw
with 5/16" drive
- 2 Each Self adhesive felt pads for the end of the block
3/4" wide x 4" long x 1/32" thick, black
- 'Ultra-Dog Protected' self-adhesive sign, 2-3/8" x 3-1/4" Oval
- Installation instructions and adjustment procedures,
in English, Spanish and French