ADA Hardware kit for Accurate Plastic laminate, outswing door

TP 8512010
MFG Part #:

ADA Hardware kit for Accurate Plastic laminate, outswing door

Replacement hardware kit for Accurate plastic laminate partitions. Includes top hinge, bottom hinge, top and bottom door inserts, hinge pins, cams, strike, keeper, bumper hook and all mounting hardware plus pull handle.
Brand: Accurate Partitions
Application: For use on an ADA, square edged, plastic laminate,
1" thick outswing door and 1-1/4" thick pilaster
This kit consists of the following (technical information follows
below in the order each of these part appear):
- 2 Each TP 3540 Top/bottom hinge
- 2 Each TP 1680 Top door inserts
- 2 Each 40-3912420 Hinge pins
- 2 Each TP 89820 Cam
- 2 Each TP 89830 Pintle
- 1 Each 40-2512710 Outswing bumper/keeper
- 1 Each 40-2513900 Slide latch
- 1 Each 40-2511702 Door pull
- 1 Each TP 270 Bumper coat hook
- 1 Each 40-2511710 Wall bumper
- 2 Each 40-3910110 #10 x 1" Torx Flat head sheet metal screw
- 4 Each 40-3912130 #10 x 5/8" Torx pan head sheet metal screw
- 5 Each 40-3910700 10-24 x 1-1/4" Torx shoulder screw
- 2 Each 40-3910800 10-24 x 1" Torx shoulder screw
- 7 Each 40-3910690 5/8" Torx barrel nut
Top/bottom hinge
'A' Dimension (distance from back face of U-bracket
to center of hinge pin hole): 1.30" / 1-5/16"
This part consists of:
- A U-Bracket with holes for mounting to a pilaster
- A tongue with bushing and hinge pin hole
Material thickness: 7/64" (between 3/32" and 1/8")
Height: 2-1/4"
Inside: 1-17/64" (between 1-1/4" and 1-9/32")
Outside: 1-1/2"
Inside: 1-1/4"
Outside: 1-5/16"
Mounting holes
Qty: 2 per fork
Dia: 9/32"
Hole to hole OC: 1-1/2"
Distance from back of fork to center of hole: 3/8"
Distance from back face of U-bracket to center of
hinge pin hole ('A' dimension): 1.30" / 1-5/16"
Height: 17/32"
Length, to front face of U-bracket: 1-11/16"
At center of hinge pin hole: 1"
Where it meets face of U-bracket: 1-1/4"
Cam/pintle hole
Distinguishing feature: 9/16" wide section of knurling
at back of hole
Hole dia: 21/32"
Top/Bottom door inserts
Material: Chrome plated zamak
Material thickness: 1/8"
Length of long, horizontal upper and lower portions
Outside: 2-5/16"
Inside: 2"
Height of center, vertical portion
Outside: 2-3/16"
Inside: 1-5/8"
Outside: 1-3/16"
Inside: 1-1/64"
Outer edge height/width: 11/32"
Hinge pin hole dia: 13/32"
Cam hole dia: 49/64" (between 3/4" and 25/32")
Distance from the back inside of the center vertical portion
to center of the hinge pin and cam holes: 1"
Mounting hole on center portion
Shape: Round, countersunk
Dia: 5/16"
Hinge pins
Material: Steel
Dia: 3/8"
Length: 4-3/8"
One end is knurled on the outside and threaded on the inside
Length of knurls: 1/2"
Thread size: 1/4-20 x 3/4?
Hole depth: 29/32"
Material: White nylon
Bevelled upper portion
Inside: 13/32"
Outside: 3/4"
Height, at highest point: 9/16"
Flat platform
Thickness: 3/64" (between 1/32" and 1/16")
Width: 1"
Length: 1-5/32"
Material: White nylon
Upper portion
Inside: 13/32"
Outside: 3/4"
Lower portion - this portion has an outside tab that runs
the length of it. This tab fits into one of the knurls on the
top/bottom hinge, purpose being for setting door closing
Inside: 13/32"
Outside: 5/8"
Bumper/keeper - Consists of a U-bracket with a bumper holder
coming off one corner, inline with one fork of the U-bracket
Material: Chrome plated zamak w/black rubber bumper
Overall height: 1-1/2"
Material thickness: 1/8"
Inside: 1-1/4"
Outside: 1-5/16"
Distance between forks: 1-5/16"
Mounting holes
Qty: 1 per fork
Dia: 17/64" (between 1/4" and 9/32")
Distance from back edge of fork to center of hole: 5/8"
Bumper/strike portion
Material thickness
Metal portion: 6/32" - 3/16"
Bumper: 5/32"
Height of both: 1-1/2"
Metal: 1/2"
Bumper: 27/64" (between 7/16" and 15/32")
Distance from face of bumper to opposite corner at the
front of U-bracket: 1-9/32"
Slide latch - consists of a mounting plate, a slide bolt and knob
Material: Chrome plated zamak
Mounting plate
Material thickness: 1/16"
Height: 3-1/4"
Width: 1-1/2"
Depth: 1/4"
Mounting holes
Qty: 2
Dia: 1/4"
Hole to hole OC: 2-3/4"
Slide bolt
Shape: Flat, rectangular
Height: 13/16"
Length: 2-3/16"
Thickness: 3/16"
Distance from underside of bolt to mounting surface: 9/32"
Length of overhang when fully bolt is fully slid to the
left or the right: 23/32"
Slide knob
Shape: Oval
Height: 7/8"
Width: 5/8"
Depth: 1/2"
Overall depth of latch, from face of slide knob
to mounting surface: 1-1/16"
Door pull
Material: Chrome plated zamak
Width: 9/16"
Inside: 2-3/8"
Outside: 4"
Inside: 13/16"
Outside: 1"
Mounting holes
Qty: 1 on each end
Thread size: 10-24 x 5/8" deep
Hole to hole OC: 3"
Bumper coat hook
Hook: Chrome plated zamak
Bumper: black rubber
Qty: 2 each, 1 long, 1 short
Prong shafts
Long shaft: 5/16"
Short shaft: 7/32"
Tip of long shaft: 9/16"
Long shaft, from front of mounting plate: 2-7/8"
Short shaft, from front of mounting plate to
back side of hook tip: 25/32"
Mounting holes
Qty: 2 each
Dia: 1/4"
Type: straight (not countersunk)
Hole to hole OC: 7/8"
Thickness of mounting plate: 5/32"
Rubber tip
Dia: 9/16"
Depth: 3/8"
Wall bumper
Material: Chrome plated zamak with black rubber bumper
Overall length, from mounting surface to bumper tip: 2"
Stem with rubber tip
Diameter: 5/16"
Rubber tip
Dia: 9/16"
Depth: 7/16"
Dia: 2"
Thickness: 1/8"
Mounting holes
Qty: 2 each
Dia: 7/32"
Hole to hole OC: 1-1/4"
Mounting fasteners - See top of page for sizes
Material: Chrome plated zamak
Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.


We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Related Products

Customers Also Viewed