Quickship
Republic Storage Systems, LLC
Republic Locker Door Complete Replacement Handle Assy, RH, 1965 - Present
- SKU:
- RS-1105-RH
- MFG Part #:
- SEE NOTES
DESCRIPTION
Replacement handle assembly for Republic Steel lockers. Complete with lift (#RS-1198), housing (#RS-1197) and screws.| Material | |
| Lift and housing | : Zinc die-cast, chrome plated |
| Bumper for lift | : Gray, non-marking rubber |
| Lift | |
| Height | |
| Upper grip (textured half) | : 15/16" |
| Lower half | : 1-5/16" |
| Both parts | : 2-1/2" |
| Depth | |
| Upper half | |
| Including mounting pegs | : 1-1/2" |
| Not including mounting pegs | : 11/16" |
| Lower half | |
| Including mounting pegs | : 1-9/32" |
| Not including mounting pegs | : 9/16" |
| Thickness | |
| Top and back edge | : 5/16" |
| Textured grip on upper half | : 3/32" |
| Grip style | : 1/16" Concave squares |
| There are flat platforms that lay between, and perpendicular to | |
| the grip handle and mounting pegs, forming a base and stop | |
| for the mounting pegs. The flat platforms butt up against | |
| the outside of the door when the handle is in place. The | |
| mounting pegs extend back off the platforms, then to the left | |
| on a 90o bend and into the side of the lockbar. | |
| Platforms | |
| Qty | : 2 Each, 1 under each mounting peg |
| Width | : 5/16" |
| Length | : 9/16" |
| Thickness | : 3/32" |
| Mounting pegs | |
| Qty | : 2 Each |
| Length | |
| To center of bend, from the platform | : 7/16" |
| From the center of the bend to the tip | : 11/32" |
| Height | |
| At platform | : 3/8" |
| At tips | : 5/16" |
| Width | : 3/16" |
| Peg to peg OC | : 1-1/8" |
| There are two bumpers, one between each platform and the | |
| handle portion, which act to keep the lift portion from | |
| 'clanging' against the housing as it moves up and down. | |
| Width | : 9/32" |
| Height | : 1/4" |
| Depth | : 3/16" |
| Padlock hole dia | : 3/8" |
| Housing | |
| Thickness | : varies, from 1/32" to 1/8" around the |
| different parts of the housing | |
| Height | : 3-13/16" |
| Width - wider at the top than the bottom | |
| Base - wider in back than in front | |
| Front | |
| Top | : 13/16" |
| Bottom | : 9/16" |
| Back | |
| Top | : 29/32" |
| Bottom | : 5/8" |
| Kick-proof hood | |
| Front | : 15/32" |
| Back, where it joins base | : 1/2" |
| Lift slot | |
| Width | : 13/32" |
| Depth (open top of hood) | : 1/2" |
| Height (front of base) | : 7/8" |
| Mounting hole | |
| Qty | : 2 each - top hole is exposed, and accessible from |
| the front of the housing, the bottom hole is concealed | |
| on the front and accessible only from the back. | |
| Dia | : 1/8" |
| Hole to hole OC | : 2-7/16" |
| Distance to center of top hole from top edge of housing | : 5/8" |
| Distance to center of bottom hole from bottom edge of | |
| housing | : 23/32" |
| Padlock hole dia | : 3/8" |
| Mounting hardware (for housing) | |
| 2 Each 8-32 X 5/16" Phillips head sems screw | |
Questions about Republic Locker Door Complete Replacement Handle Assy, RH, 1965 - Present?
Please contact us with any questions you have about Republic Locker Door Complete Replacement Handle Assy, RH, 1965 - Present and we'll be in touch.
Related Products
Quickship
Quickship
Quickship
Quickship
