Quickship
General Partitions
Top Door Insert For Knickerbocker and General Partitions, Unplated
- SKU:
- TP 4646
- MFG Part #:
- 4646
DESCRIPTION
Top door casting for General baked enamel partitions.| Material | : Unplated (unchromed) Zamak (pot metal) |
| Height, including 'tail' at bottom | : 3-3/16" |
| Material thickness | : 1/8" |
| This inset is shaped like an 'S'. It consists of | : |
| 1. Upper horizontal piece | |
| Length | : 2-11/16" |
| Height | : 9/32" |
| 2. Upper vertical piece | |
| Height | : 1-23/32" |
| Thickness | : 9/32" |
| 3. Middle horizontal piece | |
| Length | : 2-19/32" |
| Side height | : 3/8" |
| 4. Middle vertical piece | |
| Height | : 1-3/8" |
| Side width | : 9/32" |
| 5. Lower horizontal piece | |
| Length | : 2-19/32" |
| Side height | : 3/8" |
| 6. Lower vertical piece (tail) | |
| Length | : 13/16" |
| Thickness | : 5/32" |
| Width, from one side to the other | : |
| Upper horizontal, upper vertical and lower vertical | : 25/32" |
| Middle horizontal, middle vertical and lower horizotal | : 1-3/16" |
| There are three holes for the hinge pin to go through. They are located on the upper, middle and lower horizontal pieces and line up with each other vertically. | |
| Hole dia | : 1/4" |
| Distance from upper hole to middle hole, from top of upper | |
| horizontal piece to bottom of middle horizontal piece | : 1-23/32" |
| Distance from middle hole to lower hole, from bottom of middle | |
| horizontal piece to top of lower horizontal peice | : 5/8" |
Questions about Top Door Insert For Knickerbocker and General Partitions, Unplated?
Please contact us with any questions you have about Top Door Insert For Knickerbocker and General Partitions, Unplated and we'll be in touch.
Related Products
Quickship
Quickship
Quickship
Quickship
