Replacement wraparound lower hinge for Hadrian Partitions baked enamel door. Die cast zinc #4.
To verify latest product certifications and specifications, please see the manufacturer's website or contact us.
- Material: Chrome plated zamak
- Height: 1-13/16"
- Mounting portion with forks
- Thickness: 9/32"
- Inside length of each fork: 1-9/64" (between 1-1/8" and 1-5/32")
- Distance between forks: 1-1/4"
- Mounting holes
- Qty: 4 each. 2 on each fork, one above the other
- Dia: 17/64" (between 1/4" and 9/32")
- Vertical hole to hole OC: 1-1/16"
- On the back side of the mounting portion there is a
- raised circular platform in the metal, which fits into a
- hole in the pilaster. This is used for hinge placement.
- Dia: 25/32"
- Height off surface: 3/32"
- Tongue
- Length, from tip of tongue to back edge of forks: 2-7/8"
- 'A' dimension - distance from center of pintle hole
- to back of mounting plate (portion that touches
- the edge of the pilaster): 1-1/8"
- Width
- At the center of the pintle hole: 27/32"
- Where it joins the mounting portion: 1-1/2"
- Height
- At the center of the pintle hole: 33/64"
- (between 1/2" and 17/32")
- Where it joins the mounting portion: 35/64"
- (between 17/32" and 9/16")
- Pintle hole diameter
- At the top: 17/32"
- At the bottom: 3/8"
- Other door items by Hadrian that work with this product:
- - TP H12 Upper hinge
- - TP H3 Upper hinge pin
- - TP H1 Male cam assembly
- - TP H2 Female cam
- - TP H5 Inner knob
- - TP H4 ADA Inner knob
- - TP H9 Outer knob
- - TP 140 Strike/keeper
- - TP 7810 Bumper hook
- Hardware:
- - TP 302 One-way shoulder bolt
- - TP 303 One-way barrel nut
- - TP 807 Un-Do-It tool for hardware
(Only registered customers can rate)
There are no comments for this product.