Quickship
DESCRIPTION
Replacement padlock hasp for Medart locker.| Material | : Steel |
| This is a flat, 'L' shaped piece of steel, which has | |
| - Two long edges on the outside, one with a large, square cutout | |
| and one with one small square cutout - | |
| - Two shorter edge on the inside with zero cutouts. | |
| - Two ends, one with a small square cutout | |
| As the flat side faces you, for describing and measuring purposes, | |
| the long side with the large cutout will be on the left and | |
| the long side with the small cutout will be along the top, | |
| as it would be installed on the locker if you are standing | |
| and looking at it from the left side. The two small cutouts | |
| snap into the door, holding the padlock staple in place. | |
| The ME-5503 handle fits over it, concealing it. | |
| Long left side | |
| Height | : 15/16" |
| Cutout Height | : 1/4" |
| Width | : 7/32" |
| Long top side | |
| Length | : 7/8" |
| Cutout height | : 1/16" |
| Width | : 1/16" |
| Short left side height | : 5/8" |
| Short top side length | : 1/2" |
| Bottom end | |
| Length | : 11/32" |
| Cutout height | : 1/8" |
| Width | : 1/16" |
| Right end height | : 5/16" |
| Material thickness | : 3/32" |
Questions about Medart Locker Flat Padlock Hasp?
Please contact us with any questions you have about Medart Locker Flat Padlock Hasp and we'll be in touch.
Related Products
Quickship
Quickship
Quickship
Quickship
Quickship
