Quickship
Bradley Corp. / Mills
Door kit for Mills partitions, includes hinges, slide latch, keeper, bumper/hook and hardware
- SKU:
- TP MLKIT
- MFG Part #:
- HDWT-ZD1
DESCRIPTION
Mills door kit includes the following parts:TP 1001/1101ML top & bottom hinge, TP 4260ML bumper/hook, TP 2901ML slide bolt and latch, and TP 3161ML keeper/bumper.
| This is a complete door hardware kit for Mills baked enamel partitions. It includes the following parts | : |
| 1. TP 1001/1101ML top and bottom hinges with pin and pintel | |
| 2. TP 2901ML slide latch | |
| 3. TP 3161ML bumper/keeper | |
| 4. TP 4260ML bumper hook | |
| 5. Mounting hardware | |
| 1. Tp 1001/1101ML top and bottom hinge kit. This item comes with | |
| the top and bottom hinge, hinge pin, bottom pintle on a threaded | |
| shaft, wiz nut, and mounting hardware | |
| Top and bottom hinge | : |
| Material | : Chrome plated Zamak (pot metal) |
| Height | : 2" |
| Ears | |
| Ear thickness | : 1/8" |
| Face thickness | : 5/32" |
| Inside depth, from middle of the back of the face | |
| to end of ear | : 1-3/32" |
| Distance between ears | : 1-9/32" |
| Mounting holes | |
| Dia | : 1/4" |
| Hole to hole OC | : 1-3/8" |
| Distance to hole from side edge of ear | : 5/32" |
| Distance to hole from top or bottom of ear | : 3/16" |
| Tongue | |
| Total length, from front of face | : 1-13/16" |
| Width by hinge pin hole | : 1-1/8" in front of face: 1-1/2" |
| Thickness | : 3/8" |
| 'A' dimension (from back of face to center of hole | |
| in tongue) | : 1/1-4" |
| Hole dia on top hinge | : 3/8" |
| Hole dia on bottom hinge | : 7/16" |
| Top hinge pin | |
| Dia | |
| Wide section | : 3/8" |
| Narrow section | : 3/16" |
| Length | |
| Wide section | : 3-1/32" |
| Narrow section | : 19/32" |
| Total length of pin | : 3-5/8" |
| There is a cutout near the top of the pin | |
| Width | : 3/32" |
| Depth | : 1/16" |
| Distance to cutout tip of pin | : 1/8" |
| Bottom pintle with pin - this part consists of a removable | |
| nylon pintle and a steel shaft | |
| Pintle part | |
| Material | : black nylon |
| Height to top of point | : 1-3/8" |
| Outside dia | : 3/4" |
| Inside dia | : 11/32" |
| Thickness of wall | : 3/16" |
| Shaft - part long and round, part Hex, part threaded | |
| Round part | |
| Material | : steel |
| Dia | : 11/32" |
| Length | : 2" |
| Hex part (part of shaft does not move) | |
| Width | : 7/16" |
| Length | : 9/16" |
| Threaded area | : |
| Thread type | : 3/8-16 |
| Length | : 1/2" |
| Total length of shaft | : 3-1/8" |
| Wiz nut | |
| Height | : 11/32" |
| Hex dia | : 9/16" |
| Outside dia | : 3/4" |
| Thread size | : 38-16 |
| 2. TP 2901ML slide latch | |
| Material | : chrome plated Zamak |
| Width | : 1-3/4" |
| Height | : 1-3/8" |
| Thickness of outer rim | : 1/8" |
| Moveable slide handle | |
| Base width | : 1-3/16" |
| Base height | : 1-1/8" |
| Handle thickness | : 1/4" |
| Escutcheon plate | |
| Mounting holes | |
| Screw hole type | : countersunk machine |
| Dia | : 1/8" |
| Hole to hole OC | : 3/4" |
| Distance to either hole from top or bottom edge | : 1/4" |
| Distance to either hole from either side | : 25/32" |
| Slide bolt | |
| Dia | : 3/8" |
| Length | : 11/16" |
| Movement distance | : 5/16" |
| Screws (provided) | |
| Qty | : 2 each |
| Type | : 5-0 x 5/8" Torx countersunk machine screw |
| 3. TP 3161ML bumper/keeper | |
| Material | : chrome plated Zamak |
| Mounting plate | |
| Thickness | : 1/8" |
| Width, not including bumper | : 27/32" |
| Width, including bumper | : 1/2" |
| Height | : 2-1/4" |
| Bumper housing | |
| Width | : 7/16" |
| Height | : 5/8" |
| Height off mounting surface | : 15/16" |
| Bumper | |
| Material | : black rubber |
| Dia | : 1/2" |
| Thickness of material that clears housing | : 3/32" |
| Mounting holes | |
| Dia | : 1/4" |
| Hole to hole OC | : 1-5/8" |
| Distance to either hole from top or bottom | : 3/16" |
| Distance to either hole from either side | : 5/16" |
| Keeper hole | |
| Width | : 7/16" |
| Height | : 27/32" |
| 4. TP 4260M bumper hook | |
| Material | : chrome plated Zamak |
| Base is triangular in shape | |
| Width at top, by mounting holes | : 1-1/2" |
| Width at bottom, Y mounting hole | : 9/16" |
| Thickness | : 1/16" |
| Height of raised front surface from mounting surface | : 1/4" |
| Mounting holes | |
| Qty | : 3 each at the top, 1 each at the bottom |
| Dia | : 13/64"(between 3/1" and 7/32") |
| Top hole to top hole OC | : 7/8" |
| Top hole to bottom hole OC | : 1-15/16" |
| Top bumper hook | |
| Dia of narrow part | : 11/32" |
| Dia of wide part that holds bumper | : 5/8" |
| Length, from front surface, including bumper | : 3-11/32" |
| Lower hook | |
| Dia | : 1/4" |
| Length on the inside angle | : 7/8" |
| Angle | : approximately 30 degress (28 actual) |
| Bumper | |
| Material | : black rubber |
| Dia | : 1/2" |
| Thickness | : 13/32" |
| Mounting hardware included | : |
| 4 each TP 302 One-way shoulder bolt for top and bottom hinge | |
| 4 each TP 301 One-way barrel nut for top and bottom hinge | |
| 3 each #10 x 5/8" One way round head sheet metal screw | |
| for TP 4260 bumper hook | |
| 2 each #8 x 5/8" Torx countersunk sheet metal screw | |
| for TP 3161ML bumper/keeper | |
| 2 each 5-40 x 5/8" Torx countersunk machine screw | |
| for connecting the side plate and escutcheon plate | |
| of the TP 2901Ml slide latch | |
Questions about Door kit for Mills partitions, includes hinges, slide latch, keeper, bumper/hook and hardware?
Please contact us with any questions you have about Door kit for Mills partitions, includes hinges, slide latch, keeper, bumper/hook and hardware and we'll be in touch.
Related Products
Quickship
Quickship
Quickship
Quickship
