×
×
"/>

Need help? Click here or chat below, call us at 833-201-8186, or email help@shifflerequip.com

Quickship
Locker Lift compatible with Penco Vanguard for PN-3309 Handle PENCO PRODUCTS, INC. Shiffler Furniture and Equipment for Schools

Locker Lift compatible with Penco Vanguard for PN-3309 Handle

SKU:
PN-3399
MFG Part #:
4010A
Add to Wish list

DESCRIPTION

Lift only for the PN-3309 Penco locker lift handle.
Material: chrome plated Zamak (pot metal)
Housing (PN-3388)
Backplate
Height
Including tab at bottom: 3-11/16"
Not including tab: 3-5/8"
Width
At top: 13/16"
At bottom: 11/16"
Tab
Height: 3/8"
Width: 5/16"
Thickness: 5/32"
Projection past bottom edge of backplate: 3/16"
Mounting peg (projects out of the upper back portion of the
backplate and receives a palnut, which helps hold the housing
on the locker door)
Dia: 3/16"
Length: 1/2"
Lift slot
Width: 5/32"
Height
Not including tab at top and bottom of slot: 5/16"
Including tabs: 1-7/8"
Upper front moulding is bevelled on all four sides
Width
Where it meets the backplate: 13/16"
At the top of the face: 11/32"
Height
Where it meets the backplate: 1-3/32"
At the top of the face: 3/4"
Lower slot tabs
Width of both tabs and slot: 5/16"
Thickness of each tab: 1/16"
Height
Where it meets the backplate: 7/16"
At the top of the face: 9/32"
Depth
Including backplate: 13/16"
Not including backplate: 5/8"
Padlock hole
Dia: 5/16"
Type: Countersunk on the outside of each tab slot
Lift PN-3399
General shape
A straight, flat and wide handle on the front and top
A flat plate of metal behind and perpendicular to the face
of the handle, with a variety of curves along its bottom
and side edges
Handle
Width: 7/16"
Height: 1-3/32"
Thickness: 3/32"
Top, which has a shape like a short wind bottle - fat at
the bottom, where it meets the side handle, angled down to
a narrow 'neck', which becomes the same thickness as the
rest of the lift.
Width
At front, where it meets the handle: 7/16"
At the back, where it meets the lift: 1/8"
Length: 3/4"
Thickness: 1/8"
Back plate - the curves on the back edge of the left create a tab
and a fork to serve the followig purposes:
The tab, located on the back upper part of the lift is shaped
like a finger that is bent to a 'pointing' up position.
When the left is pulled out it pivots downward on the forks
(see below). This finger stops against the locker door, keeping
the lift from pulling all of the way out of the housing
The two-pronged forkshape, rounded at the tips, extends down and
out of the lower section of the lift and fits onto the lockbar, becoming the pivoting point when the lift is pulled out.
Base of finger bend to fork slot OC: 1-9/16"
Padlock hole dia: 5/16"
Palnut (PN-3390)
Outside dia: 19/32"
Depth: 1/4"
Hole dia: 7/32"
Hex
Width: 7/16"
Thickness: 1/64"
Color: dark gold

SPECIFICATIONS

Questions about Locker Lift compatible with Penco Vanguard for PN-3309 Handle?

Please contact us with any questions you have about Locker Lift compatible with Penco Vanguard for PN-3309 Handle and we'll be in touch.

Contact Us

A United For Growth Company