Questions? Call us: 800-547-1539 | Fax: 800-547-1535 | Contact Us ›
Adding to cart

Lockbar for Penco, Vanguard, 60" 1-tier locker 50-1/4" long; right hand; tan

Lockbar for Penco 60" 1-tier locker 50-1/4" long; right hand; tan
Sku: PN-3325
Price: $28.30
Replacement lock bar for Penco 60" 1-tier locker. Actual lock bar length is 50-1/4". To ensure that you receive the correct lock bar, a sample is recommended.
  • General description: Lock bar for a 60" 1-tier Penco locker
  • Brand: Penco
  • Handed: This is right handed, meaning the door it fits in is
  • hinged on the right. As the front of the lock bar faces you,
  • the raised portion on the front and flat mounting plate is
  • to the right.
  • Recognizable features:
  • - Overhead shape is like the outline an 'L'
  • - Uses the PN-3310 latch finger and PN-3305 coil spring
  • (both are included)
  • Material
  • Lock bar: Steel
  • Latch finger: White nylon
  • Material thickness: 1/32"
  • Overall height: 50-1/4"
  • Outside width: 7/8"
  • Outside depth
  • On low side: 35/64" (between 27/32" and 9/16")
  • On high side: 11/16"
  • Holes on the lock bar:
  • - On the face of the lock bar - these include:
  • - Three sets of two rectangular holes, a set at the top,
  • one in the center and one at the bottom. The smaller
  • rectangular hole is for the latch finger. The larger
  • rectangular hole is for the door jamb to pass through.
  • A bottom portion of the latch finger extends into the
  • opening of the larger rectangular door jamb hole.
  • - Three square holes near the center for lift handle operation
  • - On the right side of the lockbar as the back side faces you.
  • These include
  • - A small rectangular hole for the recessed lift
  • - A larger rectangular hole for the slide bolt of an
  • optional locker lock
  • - Two round holes. The upper one for mounting a recessed lift
  • and the lower mirrors a hole like it on the opposite side of
  • the lock bar in which a rivet mounts for the PN-3309 handle
  • to pivot on.
  • Latch finger holes
  • Qty: 3 each - 1 at the top, 1 in the center, 1 at the bottom.
  • Height: 1-1/4"
  • Width: 17/32"
  • Distance from top of the lock bar to top edge of
  • the top latch finger hole: 1-3/4"
  • Distance from bottom of the lock bar to the bottom edge
  • of the bottom latch finger hole: 2-7/8"
  • Distance from the bottom of the top latch finger hole
  • to the top of the middle latch finger hole: 24-3/4"
  • Distance from the bottom of the middle latch finger hole
  • to the top of the bottom latch finger hole: 18-3/4"
  • Door jamb holes
  • Qty: 3 each - 1 at the top, 1 in the center, 1 at the bottom.
  • Height: 1-7/8"
  • Width: 3/8"
  • Distance from top of the lock bar to top edge of
  • the top door jamb hole: 2-11/32"
  • Distance from bottom of the lock bar to the bottom edge
  • of the bottom door jamb hole: 13/32"
  • Distance from the bottom of the top door jamb hole
  • to the top of the middle door jamb hole: 24-1/8"
  • Distance from the bottom of the middle door jamb hole
  • to the top of the bottom door jamb hole: 18-1/8"
  • Square lift holes
  • Qty: 3, one over the other, all near the center
  • Top hole
  • Height: 13/16"
  • Width: 1/2"
  • Center hole
  • Height: 5/8"
  • Width: 1/2"
  • Bottom hole
  • Height: 41/64" (between 5/8" and 21/32")
  • Width: 9/16"
  • Distance from top of lock bar to top hole: 22"
  • Distance from top hole to center hole: 5/16"
  • Distance from center hole to bottom hole: 23/32"
  • Distance from bottom of bottom hole to
  • bottom of lock bar: 25-1/2"
  • Side holes:
  • - Small rectangular hole for recessed lift
  • Height: 1/2"
  • Width: 3/16"
  • Distance from top of lock bar to top of hole: 19-1/8"
  • - Locker lock hole
  • Height: 7/8"
  • Width: 13/32"
  • Distance from top of lock bar to top of hole: 20"
  • - Round recessed lift mounting hole
  • Dia: 3/16"
  • Distance from top of lock bar to top of hole: 21-3/16"
  • Distance from bottom of small rectangular hole to
  • top of round hole: 1-9/16"
  • Please note: The above provided measurements represent only one
  • of the lock bars for a 60" locker that Penco has created over
  • the years as they updated and improved their product. These
  • improvements also changed the hole patterns and their placement
  • on the lock bar. In addition, some lock bars are not returnable.
  • Because of these factors, samples are preferred for all lock bar
  • orders, assuring you the convenience of getting the correct item
  • the first time.
Customer Reviews
(0.00)
# of Ratings: 0
There are no comments for this product.