Bobrick Washroom
18" Straight grab bar, 1-1/2" dia Satin stainless steel; peened grip
- SKU:
- BOBB680699X18
- MFG Part #:
- B-6806.99X18
DESCRIPTION
Straight Grab Bar. 1-1/2" (38 mm) diameter peened grip snap-flange. 18" (455 mm). Cover snaps over mounting flange to conceal screws. Concealed mounting flange 1/8" (3 mm) thick, type 304 stainless steel plate, 2" x 3-1/8"H (50 x 80 mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8 mm), type 304 stainless steel with satin finish, 3-1/4" (85 mm) diameter.| General description | : 18" Straight grab bar with peened gripping |
| surface, satin finish and 1-1/2" diameter tube | |
| Manufacturer | : Bobrick |
| Shipping information | : 2.1 lbs, ships via UPS |
| Warranty | : One (1) year from date of purchase |
| Bar style | : Straight. For mounting horizontally, vertically |
| or on the diagonal | |
| Mounting style | : Each end of the bar tube is attached to |
| an end mounting flange for mounting to the wall. | |
| Flange comes with a snap-over cover. | |
| Capacity | : This grab bar provides 1-1/2" clearance from |
| the wall and can support loads in excess of 900 lbs if | |
| properly installed, complying with barrier-free accessibility | |
| guidelines for structural strength. Caution | : Grab bars are |
| no stronger than the anchors and walls to which they are | |
| attached and, therefore, must be firmly secured in order to | |
| sustain the loads for which they are intended. | |
| Material | |
| Grab bar | : 18-8 S, 18 gauge, type-304 stainless steel tubing |
| Mounting flange | : 18-8 S, 1/8" thick, type-304 stainless steel |
| Snap flange covers | : 18-8 S, 22 gauge, drawn stainless steel |
| Finish | : Satin, with peened gripping surface |
| Size | |
| Grab bar portion | |
| Length | |
| From center to center of mounting plates | : 18" |
| From end to end of snap flanges | : 21-1/4" |
| Inside space | |
| Length | : 16-3/8" |
| Depth | : 1-1/2" |
| Tube dia | : 1-1/2" |
| Mounting flange | |
| Shape | : Flat sides, rounded ends |
| Orientation to the grab bar | : When bar is horizontal, |
| the flanges are vertical, or at a 'T' with the bar, | |
| and the holes are one over the other | |
| Height | : 3-1/8" |
| Width | : 2" |
| Thickness | : 1/8" |
| Depth from back of flange to outside of snap nubs | : 5/16" |
| Mounting holes | |
| Qty | : 2 |
| Hole to hole OC | : 2-1/4" |
| Snap flange cover | |
| Thickness | : 1/32", 22 Gauge |
| Outside dia | : 3-1/4" |
| Depth | : 19/32" |
| ADA Guidelines | : |
| - Grab bar diameter should be 1-1/4" to 1-1/2" with 1-1/2" clearance | |
| from the wall | |
| - Grab bars should not rotate in their fittings | |
| - The required mounting height is universally 33" to 36" from the | |
| centerline of the grab bar to the finished floor | |
| - For all Barrier-Free (ADA) toilet compartments, individual toilet | |
| rooms and guest bathrooms, it is recommended that a 36" | |
| minimum horizontal grab bar be installed on the back wall over | |
| the toilet and a 42" minimum horizontal grab bar be installed | |
| on the side wall or partition nearest the toilet. | |
Questions about 18" Straight grab bar, 1-1/2" dia Satin stainless steel; peened grip?
Please contact us with any questions you have about 18" Straight grab bar, 1-1/2" dia Satin stainless steel; peened grip and we'll be in touch.
Related Products
