Bobrick Washroom
Grab Bar Mounting Kit - 3 Round Head Sheet Metal Screws(1 Required for each flange)
- SKU:
- BOBB25230
DESCRIPTION
Optional mounting kit contains 3 round-head sheet metal screws. 1 kit required for each flange.| General Description | : 12" Grab bar |
| Manufacturer | : Bobrick |
| Bar style | : Straight; concealed mounting with snap flange |
| Mounting style | : Concealed mounting flange with screw holes |
| for concealed anchors | |
| Material | : All stainless steel |
| Finish | : Satin |
| Bar Length | : |
| From center to center of mounting plates | : 12" |
| From end to end of snap flanges | : 15-1/4" |
| Bar Inside space | : |
| Length | : 10-3/8" |
| Depth | : 1-1/2" |
| Bar Dia | : 1-1/2" |
| Mounting plate - flat on side, rounded on each end | |
| Width | : 1-31/32" |
| Length, at center | : 3-1/8" |
| Thickness | : 1/8" |
| Snap flange | |
| Outside dia | : 3-1/4" |
| Height | : 19/32" |
| Thickness | : 1/32", 22 gauge |
| ADA Guidelines | : |
| - Grab bar diameter should be 1-1/4" to 1-1/2" with 1-1/2" clearance | |
| from the wall | |
| - Grab bars should not rotate in their fittings | |
| - The required mounting height is universally 33" to 36" from the | |
| centerline of the grab bar to the finished floor. | |
| - The structural strength of all grab bars and their mounting | |
| devices should withstand more than 250 lbs of force (1112N) | |
| - For all Barrier-Free toilet compartments, individual toilet rooms | |
| and guest bathrooms, it is recommended that a 36" minimum | |
| horizontal grab bar be installed on the back wall over the toilet | |
| and a 42" minimum horizontal grab bar be installed on the | |
| side wall or partition nearest the toilet. This can also be | |
| accomplished with a single horizontal two-wall grab bar | |
| (B-68137 - comes with concealed mounting and peened surface). | |
Questions about Grab Bar Mounting Kit - 3 Round Head Sheet Metal Screws(1 Required for each flange)?
Please contact us with any questions you have about Grab Bar Mounting Kit - 3 Round Head Sheet Metal Screws(1 Required for each flange) and we'll be in touch.
Related Products
Quickship
