DESCRIPTION
Replacement lock bar for Lyon 36'' double tier, painted steel lockers. Actual lock bar size is 33-1/2''. To assure proper lock bar is shipped, samples are required.SPECIFICATIONS
| General description | Lock bar for a 72" double tier locker |
| Brand | Lyon |
| Year | October 1960 to February 1980 |
| Overhead shape | Resembles a wide 'U' |
| Recognizable feature | Uses the LY-6787 Latch finger |
| Handing | This is for a right hand locker, meaning the door |
| is hinged on the right side. As the inside of the lock bar's | |
| 'U' channel faces you, the latch finger is semi- visible and | |
| the handle is on the right side. | |
| Material | Steel |
| Material thickness | 1/32" |
| Overall height | 33-1/2" |
| Outside width | 1" |
| Outside depth | 11/16" |
| Door jamb holes - these are two large rectangular holes through | |
| which the door jamb fits when the door is closed. Each hole | |
| also exposes a lower portion of the latch finger, which is | |
| secured just above it. NOTE | There are smaller 'L' shaped |
| holes just below the top and bottom large rectangular holes, | |
| but in all of the following measurements, we will refer | |
| only to the larger rectangular holes. | |
| Qty | 2 each - 1 at the top, 1 at the bottom. |
| Height | 1-3/4" |
| Width | 1/2" |
| Distance from top of the lock bar to top edge of | |
| the top hole | 4" |
| Distance from bottom of the lock bar to the bottom edge | |
| of the bottom large hole | 3-3/16" |
| Locker handle and lock holes - On the right side of the lock bar, | |
| as the inside of the 'U' of the lock bar faces you, there is a | |
| series of slots (5), round (10) and oval (2 sets of 2) holes for | |
| handles to mount to and rectangular holes (4) for the slide bolt | |
| of an optional locker lock. Measuring from the top of the | |
| lock bar | |
| Rectangular holes | |
| Size | 29/32" x 11/32" |
| Distance from top of lock bar to | |
| - The top edge of the first rectangular hole | 9-9/16" |
| - The top edge of the second rectangular hole | 11-5/8" |
| - The top edge of the third rectangular hole | 17-1/8" |
| - The top edge of the fourth rectangular hole | 23-3/16" |
| Oval hole | |
| Size | 3/8" x 3/16" |
| Distance from top of lock bar to | |
| - The top edge of the first hole in the first set | |
| of 2 oval holes | 13-9/16" |
| - The top edge of the first hole in the second set | |
| of 2 oval holes | 21-1/8" |
| Oval hole to oval hole OC in each set | 1-3/4" |
| Please note | The above provided measurements represent one of many |
| lock bars for a 72" locker that Lyon has created over the years | |
| as they updated and improved their product. These improvements | |
| also changed the hole patterns and their placement on the lock bar. | |
| In addition, some lock bars are not returnable. Because of these | |
| factors, samples are required for all lock bar orders, assuring you | |
| the convenience of getting the correct item the first time. | |
Questions about Lock Bar for Lyon Locker, 72" 2-Tier Locker, 1960-1980?
Please contact us with any questions you have about Lock Bar for Lyon Locker, 72" 2-Tier Locker, 1960-1980 and we'll be in touch.
Related Products
Quickship
Quickship
Quickship
Quickship
prev
next
