Quickship
Global Specialties
ADA Door hardware kit for Global Metal outswing door
$65.12
- SKU:
- TP GLOKITBEADA
- MFG Part #:
- 8513500 + 8513512
DESCRIPTION
Replacement hardware kit for a Global ADA door.SPECIFICATIONS
| This is a kit that includes all of the hardware necessary to hang | |
| either a standard or an ADA door. It is made to fit round edge, | |
| steel partitions | 1-1/4" thick pilasters and 1" thick doors. |
| There are two sets of hardware, listed below. Technical information | |
| follows in the same order | |
| Set 1 includes | |
| - Top hinge | |
| - Top hinge pin, nylon | |
| - Bottom hinge with pintle, lock washers and nut | |
| - Bottom door cam | |
| - Coat hook with bumper | |
| - Turn knob set for standard door | |
| - Strike/keeper | |
| - Mounting hardware | |
| Set 2 includes ADA supplementals | |
| - Top hinge pin, stainless steel | |
| - Turn knob set with paddle handle for ADA door | |
| - Pull handle | |
| - Wall bumper | |
| - Mounting hardware | |
| SET 1 | |
| Top hinge | |
| Brand | Global |
| Application | Used on a 1-1/4" thick, round edged |
| metal pilaster and a 1" thick, round edge metal door | |
| 'A' Dimension (distance from back face of U-bracket | |
| to center of hinge pin hole | 1-1/8" |
| This part consists of | |
| - A U-Bracket with holes for mounting to a pilaster | |
| - A tongue with hinge pin hole and bushing | |
| U-Bracket | |
| Material | Chrome plated zamak |
| Material thickness | 7/64" (between 3/32" and 1/8") |
| Height | 2-3/16" |
| Width | |
| Inside | 1-17/64" (between 1-1/4" and 1-9/32") |
| Outside | 1-15/32" |
| Depth | |
| Inside, at center | 31/32" |
| Outside | 1-1/16" |
| Mounting holes | |
| Qty | 2 per fork |
| Dia | 9/32" |
| Hole to hole OC | 1-1/2" |
| Distance from back face of fork to center of hole | 7/32" |
| Tongue | |
| Distance from back face of U-bracket to center of | |
| hinge pin hole ('A' dimension) | 1-1/8" |
| Height | |
| At hinge pin hole | 1/2" |
| At face of U-bracket | 9/16" |
| Length, to front face of U-bracket | 1-5/8" |
| Width | |
| At U-bracket | 1-1/32" |
| At hinge pin hole | 15/16" |
| Hinge pin hole | |
| Including bushing | 13/32" |
| Not including bushing | 39/64" (between 19/32" and 5/8") |
| Bushing | |
| Material | White nylon |
| Thickness | 5/64" |
| Top hinge pin | |
| Style | The top end has a deep inside hole for inserting a |
| screw to back the pin out. The bottom is a smaller diameter | |
| than the rest of the pin and has a snap-in locking tip. | |
| Material | White nylon |
| Overall length | 3-15/32" |
| Upper portion | |
| Length | 2-23/32" |
| Dia | 3/8" |
| Hole | |
| Dia | 13/64" (between 3/16" and 7/32") |
| Length | 17/32" |
| Lower portion with locking tip | |
| Length | 3/4" |
| Dia | 5/32" - 3/16" |
| Grooves | |
| Length | 3/16" |
| Distance between grooves | 1/64" |
| Threads | |
| Thread size | 10-24 |
| Depth | 11/16" |
| Bottom hinge with pintle, lock washers and nut | |
| Material | Chrome plated zamak |
| 'A' Dimension (distance from back face of U-bracket | |
| to center of hinge pin hole) | 1-1/8" |
| The hinge consists of | |
| - A U-Bracket with holes for mounting to a pilaster | |
| - A tongue with a pintle hole | |
| U-Bracket | |
| Material thickness | 7/64" (between 3/32" and 1/8") |
| Height | 2-3/16" |
| Width | |
| Inside | 1-17/64" (between 1-1/4" and 1-9/32") |
| Outside | 1-15/32" |
| Depth | |
| Inside, at center | 31/32" |
| Outside | 1-1/16" |
| Mounting holes | |
| Qty | 2 per fork |
| Dia | 9/32" |
| Hole to hole OC | 1-1/2" |
| Distance from back of fork to center of hole | 7/32" |
| Tongue | |
| Distance from back face of U-bracket to center of | |
| hinge pin hole ('A' dimension) | 1-1/8" |
| Height | |
| At pintle hole | 1/2" |
| At U-bracket | 9/16" |
| Length, to front face of U-bracket | 1-5/8" |
| Width | |
| At hinge pintle hole | 15/16" |
| At U-bracket | 1" |
| Pintle hole | |
| Dia | 11/32" |
| Distance from hole center to outer tip of tongue | 19/32" |
| Pintle - includes an internal and an external tooth washer | |
| and a nut. It has a slanted upper nylon portion and a | |
| lower threaded steel portion with an adjustment slot | |
| at the tip | |
| Material | |
| Upper | Nylon |
| Lower | Steel, bright finish |
| Upper nylon portion | |
| Dia | 21/32" |
| Height | |
| At tallest point | 1-1/8" |
| At shortest point | 11/16" |
| Lower threaded portion | |
| Overall length | 1-1/32" |
| Thread size | 5/16-18 x 9/16" |
| Adjustment slot | |
| Width | 1/32" |
| Length | 7/32" |
| Depth | 3/32" |
| Upper external tooth washer | |
| Material | Steel |
| Thickness | 1/32" |
| Diameter | |
| Inside | 11/32" |
| Outside | 9/16" |
| Lower internal tooth washer | |
| Material | Steel |
| Thickness | 1/32" |
| Diameter | |
| Inside | 11/32" |
| Outside | 19/32" |
| Hex nut | |
| Material | Steel |
| Size | 5/16-18 |
| Outside drive | 1/2" |
| Bottom door cam - This item is | |
| - Square on the outside, has a rectangular base and outer tabs | |
| on the outside that lock into the bottom door casting, | |
| preventing rotation | |
| - Round on the inside with a beveled ceiling that mirrors the | |
| top of the pintle (see lower door hinge) | |
| Material | White nylon |
| Material thickness | 1/8" |
| Overall height | 1-1/4" |
| Outside section | |
| Upper square portion | |
| Height | 1-1/8" |
| Width/depth | 27/32" |
| Lower base | |
| Thickness | 1/8" |
| Length | 1-3/32" |
| Width | 7/8" |
| Locking tabs | |
| Depth off surface of square portion | 7/64" |
| Width | 9/32" |
| Height from base | |
| Side 1 | 11/32" |
| Side 2 | 27/32" |
| Inside portion | |
| Diameter | 23/32" |
| Height | |
| At tallest portion | 1-1/16" |
| At shortest portion | 5/8" |
| Coat hook with bumper - consists of a mounting plate, | |
| straight upper hook with bumper and curved lower hook | |
| Material | Chrome plated zamak with black rubber bumper |
| Mounting plate | |
| Thickness | 3/32" |
| Width | 1-11/32" |
| Height | 2" |
| Mounting holes | |
| Qty | 2 |
| Dia | 7/32" |
| Hole to hole OC | 7/8" |
| Straight upper hook with bumper | |
| Overall length, from back of mounting plate | 3-1/16" |
| Diameter | |
| At mounting plate | 9/32" |
| At bumper | 9/16" |
| Bumper | |
| Length | 7/16" |
| Dia | 9/16" |
| Curved lower hook | |
| Hook dia | 1/4" |
| Inside dia of curve | 1-1/16" |
| Distance from the top of the curved hook to the bottom | |
| of the upper straight hook | |
| From the highest portion of curve | 5/8" |
| From the lowest portion of curve | 1-1/4" |
| Turn knob - consists of an inner turn knob and an outer | |
| escutcheon plate | |
| Material | Chrome plated zamak |
| Inner turn knob - female portion | |
| Handle | |
| Shape | Bow tie, with hole in the center for |
| shoulder screw (included - see 'Mounting Hardware') | |
| Depth off surface of mounting plate | 15/32" |
| Outside dia | 1-19/32" |
| Diameter of door hole it fits | 1-1/4" |
| Diameter of center hole in bow tie handle | 9/32", |
| with a 15/32" cutout at the top for the head of a screw | |
| Outer escutcheon plate (male portion) | |
| Outer plate | |
| Outside features | |
| - All-American's name is stamped on it | |
| - Emergency access slot | |
| Outside dia | 1-5/8" |
| Diameter of door hole it fits | 1-1/4" |
| Overall thickness/depth | 13/32" |
| Posts - there is a tall, threaded center post with tension | |
| spring and a short outside post with locking nipple | |
| Center to outside post OC | 3/8" |
| Threaded center post | |
| Length, from inside of outer plate | |
| Overall | 7/8" |
| Lower portion only | 5/8" |
| Upper portion only | 1/4" |
| Outside diameter | |
| Lower portion | 3/8" |
| Upper portion | 1/4" |
| Thread size | 10-24 x 1/2" |
| Outside post | |
| Length, from inside of outer plate | |
| Overall | 9/16" |
| Lower portion only | 7/16" |
| Upper portion only | 1/8" |
| Outside diameter | |
| Lower portion | 11/32" |
| Upper locking nipple | 5/32" |
| Strike/Keeper - consists of | |
| - A U-bracket with mounting forks and a face plate that has | |
| a keeper hole | |
| - A bumper plate, in-line with the forks | |
| Material | Chrome plated zamak, with black rubber bumper |
| Mounting forks | |
| Height | 1-3/16 |
| Thickness | 1/8" |
| Inside length, in the center | 1-3/32" |
| Distance between forks | 1-9/32" |
| Mounting holes | |
| Qty | 1 per fork |
| Dia | 9/32" |
| Distance from side edge of fork to hole center | 7/16" |
| Face plate | |
| Thickness | 7/64" (between 3/32" and 1/8") |
| Height | 1-3/16" |
| Keeper hole | |
| Shape | Rectangular, with radius corners |
| Height | 25/32" |
| Width | 15/32" |
| Bumper plate | |
| Thickness, not including bumper | 3/8" |
| Height | 1-3/16" |
| Projection off front of face plate | 1-1/16" |
| Bumper | |
| Shape | Doughnut |
| Outside dia | 25/32" |
| Inside dia | 11/32" |
| Thickness off plate surface | 5/32" |
| Mounting hardware is provided, and includes | |
| For the top and bottom hinges and the strike keeper | |
| - 5 Ea 10-24 x 1-5/16" Torx shoulder screw, zinc plated steel | |
| - 5 Ea 10-24 x 5/8" Torx barrel nut, zinc plated steel | |
| For the turn knob and escutcheon plate | |
| - 1 Ea 10-24 x 1/2" Torx shoulder screw, stainless steel | |
| For the coat hook with bumper | |
| - 2 Ea #12 x 5/8" Torx tapping screw, zinc plated steel | |
| SET2 | |
| Top hinge pin, stainless steel | |
| Style | The top end has a threaded hole for inserting a screw |
| to back the pin out. The bottom is a smaller diameter | |
| than the rest of the pin and has a snap-in locking tip. | |
| Material | Stainless steel |
| Overall length | 3-15/32" |
| Upper portion | |
| Length | 2-23/32" |
| Dia | 3/8" |
| Hole | |
| Dia | 13/64" (between 3/16" and 7/32") |
| Length | 17/32" |
| Lower portion with locking tip | |
| Length | 3/4" |
| Dia | 5/32" - 3/16" |
| Threads | |
| Thread size | 10-24 |
| Depth | 3/4" |
| ADA Turn knob with paddle handle for ADA door - | |
| female portion only (male escutcheon plate is included in Set 1) | |
| Material | Chrome plated zamak |
| Outer circular plate | |
| Outside dia | 1-19/32" |
| Diameter of door hole it fits | 1-1/4" |
| Depth | 5/16" |
| Paddle handle | |
| Height | 3" |
| Width | 3/8" |
| Depth | |
| At circular plate | 1-3/16" |
| At tail | 31/32" |
| Depth of space between tail and door when installed | 3/16" |
| Mount style | Comes with shoulder screw for mounting |
| to escutcheon plate (see 'Mounting Hardware' for this set) | |
| Size of center hole in handle | |
| Outside | 5/8" dia |
| Inside hole | |
| Upper (for screw head to set) | 1/2" dia x 13/16" deep |
| Lower (for screw shoulder to set) | 9/32" dia x 17/32" deep |
| Pull handle | |
| Material | Chrome plated zamak |
| Width, on the outside | 9/16" |
| Length | |
| Inside | 3-1/8" |
| Outside | 4-11/16" |
| Height | |
| Inside | 13/16" |
| Outside | 31/32" |
| Mounting holes | |
| Type | 10-24 x 11/16" deep |
| Hole to hole OC | 3-1/2" |
| Wall bumper | |
| Material | Chrome plated zamak with black rubber bumper Overall length, from mounting surface to bumper tip: 2" |
| Stem with rubber tip | |
| Diameter | 5/16" |
| Rubber tip | |
| Dia | 9/16" |
| Depth | 7/16" |
| Base | |
| Dia | 2" |
| Thickness | 1/8" |
| Mounting holes | |
| Qty | 2 each |
| Dia | 7/32" |
| Hole to hole OC | 1-1/4" |
| Mounting hardware | |
| For the pull handle | |
| - 2 Ea 10-24 x 1-1/4" Torx shoulder screw, zinc plated steel | |
| For the turn knob and escutcheon plate | |
| - 1 Ea 10-24 x 1/2" Torx shoulder screw, stainless steel | |
Questions about ADA Door hardware kit for Global Metal outswing door?
Please contact us with any questions you have about ADA Door hardware kit for Global Metal outswing door and we'll be in touch.
Related Products
Quickship
Quickship
Quickship
prev
next
