ADA hardware kit with vault hinges for Accurate Solid plastic, outswing door
Accurate Partitions
- SKU:
- TP 8571010
- MFG Part #:
- 40-8571008
Brand | : Accurate Partitions |
Application | : For use on an ADA, square edged, plastic laminate, |
1" thick outswing door and 1-1/4" thick pilaster | |
This kit consists of the following (technical information follows | |
below in the order each of these part appear) | : |
- 1 Each 40-2562820 Top vault hinge, pilaster side | |
- 1 Each 40-2562830 Top vault hinge, door side | |
- 1 Each 40-2562840 Bottom vault hinge, pilaster side | |
- 1 Each 40-2562850 Bottom vault hinge, door side | |
- 1 Each 40-2563900 Slide latch | |
- 1 Each 40-2562740 Outswing strike/keeper | |
- 1 Each 40-2511700 Door pull handle | |
- 1 Each 40-2561600 Bumper coat hook | |
- 1 Each 40-2511710 Wall bumper | |
- 8 Each 40-3260600 10-24 x 1" Torx shoulder screw | |
- 1 Each 40-3260750 10-24 x 3/4" Torx shoulder screw | |
- 8 Each 40-3260590 10-24 x 1/2" Torx barrel nut | |
- 1 Each 40-3260690 10-24 x 5/8" Torx barrel nut | |
- 4 Each 40-3262130 10-24 x 5/8" Torx pan head sheet metal screw | |
Top hinge - consists of a door-side piece and a pilaster-side piece | |
Material | : Stainless steel, brushed finish. Door-side piece |
has a white nylon insert which fits down over a post on | |
the pilaster-side piece. | |
Door-side piece - consists of a horizontal 'U' bracket over a | |
pivot cylinder with nylon insert | |
Overall size | |
Height | : 1-3/4" |
Length | : 2-1/4" |
Width, at widest portion | : 1-3/4" |
Material thickness | : 3/32" - 11/32" |
Horizontal U-bracket | |
Length | : 2-1/4" |
Height | : 25/32" - 15/16" |
Distance between forks | : 1-1/64" |
Mounting holes | |
Qty | : 2 per fork |
Diameter | |
Inside | : 9/32" |
Outside | : 15/32" |
Hole to hole OC | : 1-1/2" |
Pivot cylinder with nylon insert | |
Steel portion | |
Thickness | : 5/32" |
Depth | : 3/4" |
Outside dia | : 1-3/16" |
Nylon insert | |
Thickness | : 7/32" |
Depth | : 13/16" |
Inside dia | : 1/2" |
Pilaster-side piece - consists of a vertical 'U' bracket on one side | |
and a horizontal pocket with a swivel post on the other side, | |
which fits into the nylon insert on the door side piece | |
Overall size | |
Height | : 2-7/32" |
Length | : 2-3/4" |
Width | : 1-3/4" |
Material thickness | : 3/32" - 11/32" |
Vertical U-bracket | |
Distance between forks | : 1-1/64" |
Mounting holes | |
Qty | : 2 per fork |
Diameter | |
Inside | : 9/32" |
Outside | : 15/32" |
Hole to hole OC | : 1-1/2" |
Horizontal pocket | |
Height | : 15/16" |
Inside dia | : 1-1/4" |
Swivel post | |
Height | : 13/16" |
Dia | : 15/32" |
Bottom hinge - consists of a door-side piece and pilaster-side piece | |
Material | : Stainless steel, brushed finish. |
Door-side piece - consists of a horizontal 'U' bracket over a | |
beveled cylinder that has a hinge pin in the center of it. | |
The beveled cylinder moves and rotates against a beveled | |
nylon cam in the pilaster-side piece | |
Overall size | |
Height | : 2-13/16" |
Length | : 2-1/4" |
Width, at widest portion | : 1-3/4" |
Material thickness | : 3/32" - 11/32" |
Horizontal U-bracket | |
Length | : 2-1/4" |
Height, at highest point | : 1-3/16" |
Distance between forks | : 1-1/64" |
Mounting holes | |
Qty | : 2 per fork |
Diameter | |
Inside | : 9/32" |
Outside | : 15/32" |
Hole to hole OC | : 1-1/2" |
Beveled cylinder with hinge pin | |
Cylinder portion | |
Thickness | : 9/32" |
Height, at highest point | : 5/8" |
Outside dia | : 1-3/16" |
Hinge pin | |
Length | : 1-13/32" |
Dia | : 1/4" |
Pilaster-side piece - consists of a vertical 'U' bracket on one | |
side and a horizontal pocket that has a beveled nylon cam | |
assemblY with a hinge pin hole in the center of it. The | |
assembly is held in place with an internal tooth washer and | |
hex nut, for setting the door opening | |
Overall size | |
Height | : 3-1/8" |
Length | : 2-25/32" |
Width | : 1-3/4" |
Material thickness | : 3/32" - 11/32" |
Vertical U-bracket | |
Distance between forks | : 1-1/64" |
Mounting holes | |
Qty | : 2 per fork |
Diameter | |
Inside | : 9/32" |
Outside | : 15/32" |
Hole to hole OC | : 1-1/2" |
Horizontal pocket | |
Height | : 15/16" |
Inside dia | : 1-1/4" |
Nylon cam | |
Height, at highest point | : 11/16" |
Dia | : 1-3/16" |
Hinge pin hole dia | : 9/32" |
Bumper/keeper - consists of a U-bracket with a bumper holder coming | |
off one corner, in line with the forks of the U-bracket | |
Material | : Stainless steel, brushed finish, w/black rubber bumper |
Overall height | : 1-1/2" |
Forks | |
Material thickness | : 1/8" - 3/16" |
Length | |
Inside | : 1-1/4" |
Outside | : 1-3/8" |
Distance between forks | : 1-1/64" |
Mounting holes | |
Qty | : 1 per fork |
Dia | : 17/64" (between 1/4" and 9/32") |
Distance from back edge of fork to center of hole | : 5/8" |
Bumper/strike portion | |
Material thickness | |
Metal portion | : 6/32" - 3/16" |
Bumper | : 5/32" |
Height of both | : 1-1/2" |
Depth | |
Metal | : 1/2" |
Bumper | : 7/16" |
Face width | : 1-5/32" |
Slide latch - consists of a mounting plate, a slide bolt and knob | |
Material | : Stainless steel, brush finish |
Mounting plate | |
Material thickness | : 1/16" |
Height | : 3-1/4" |
Width | : 1-1/2" |
Depth | : 1/4" |
Mounting holes | |
Qty | : 2 |
Dia | : 17/64" (between 1/4" and 9/32") |
Hole to hole OC | : 2-3/4" |
Slide bolt | |
Shape | : Flat, rectangular |
Height | : 13/16" |
Length | : 2-3/16" |
Thickness | : 3/16" |
Distance from underside of bolt to mounting surface | : 9/32" |
Length of overhang when fully bolt is fully slid to the | |
left or the right | : 23/32" |
Slide knob | |
Shape | : Oval |
Height | : 7/8" |
Width | : 5/8" |
Depth | : 9/16" |
Overall depth of latch, from face of slide knob | |
to mounting surface | : 1-1/16" |
Door pull | |
Material | : Chrome plated zamak |
Width | : 9/16" |
Length | |
Inside | : 2-3/8" |
Outside | : 4" |
Height | |
Inside | : 13/16" |
Outside | : 1" |
Mounting holes | |
Qty | : 1 on each end |
Thread size | : 10-24 x 5/8" deep |
Hole to hole OC | : 3" |
Bumper coat hook | |
Material | |
Hook | : Stainless steel, satin finish |
Bumper | : Black rubber |
Overall length, from mounting surface to rubber tip | : 3-1/16" |
Hook qty | : 1 upper, long and straight hook |
1 lower, short and curved | |
Upper straight hook | |
Length, from face of mounting plate | : 2-31/32" |
Dia | : 17/64" (between 1/4" and 9/32") |
Bumper | |
Dia | : 9/16" |
Depth | : 7/16" |
Lower curved hook | |
Hook dia | : 1/4" |
Inside dia of curve | : 1" |
Amount of space between tip of lower hook and | |
stem of upper hook | : 5/8" |
Mounting holes | |
Qty | : 2 each |
Dia | : 7/32" |
Type | : Slightly countersunk from the back |
Hole to hole OC | : 7/8" |
Thickness of mounting plate | : 3/32" |
Wall bumper | |
Material | : Chrome plated zamak with black rubber bumper |
Overall length, from mounting surface to bumper tip | : 2" |
Stem with rubber tip | |
Diameter | : 5/16" |
Rubber tip | |
Dia | : 9/16" |
Depth | : 7/16" |
Base | |
Dia | : 2" |
Thickness | : 1/8" |
Mounting holes | |
Qty | : 2 each |
Dia | : 7/32" |
Hole to hole OC | : 1-1/4" |
Mounting fasteners - See top of page for sizes | |
Material | : Stainless steel |
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Customers Also Viewed
Hardware kit, with vault hinges for Solid Plastic, inswing door
TP 8571000
Replacement door hardware kit for Accurate solid plastic partitions. Kit includes stainless steel top & bottom hinges, strike, keeper, bumper hook and all mounting hardware. Brand: Accurate...
Pivot Hinge Set Used By Accurate And Stainless Steel
TP 7813
Pivot Hinge Set Used By Accurate And Stainless Steel
ADA Hardware kit for Accurate Plastic laminate, outswing door
TP 8512010
Replacement hardware kit for Accurate plastic laminate partitions. Includes top hinge, bottom hinge, top and bottom door inserts, hinge pins, cams, strike, keeper, bumper hook and all mounting...
All American Door Hardware Set for Plastic Laminate, Inswing Door
TP AAPLIN
For plastic laminate, in-swing. Includes: top hinge, bottom hinge, hinge pin, cams, door inserts, strike, keeper, bumper hook and all mounting hardware.
Ear 2-1/2" Long Mounting Bracket for Panel or Pilaster, Chrome Plated Zamak
1 EAR-1-VARI
1 Ear 2-1/2" Long Mounting Bracket for Panel or Pilaster, Chrome Plated Zamak SKU 1 EAR-1: for 1" Thick Pilaster or PanelSKU 1 EAR-114: for 1-1/4" Thick Pilaster or PanelSKU 1 EAR-34: for 3/4" Thick...
ADA Door hardware kit for Global Metal outswing door
TP GLOKITBEADA
Replacement hardware kit for a Global ADA door. This is a kit that includes all of the hardware necessary to hang either a standard or an ADA door. It is made to fit round edge, steel partitions: ...
All American Door Hardware Set for Plastic Laminate, Outswing Door
TP AAPLOUT
For plastic laminate, out-swing. Includes: top hinge, bottom hinge, hinge pin, cams, door inserts, strike, keeper, bumper hook and all mounting hardware.
Hardware kit for plastic Laminate, inswing door
TP 8512000
Replacement hardware kit for Accurate plastic laminate partitions. Includes top hinge, bottom hinge, top and bottom door inserts, hinge pins, cams, strike, keeper, bumper hook and all mounting...
Conical Washer Lyon SPI # 1038040
130P10549
Conical Washer Lyon SPI # 1038040.
Diversified Woodcrafts Wall & Island Bench - Lb-D2, 12"W Locker, Double Door
DW-MAD2-12L
This series offers 1-3/4" maple tops and 4 bench lengths and 3 locker styles to choose from. The all-welded, 1-section construction has reinforced side panels (20-gauge). Locker doors (18-gauge) have...
Diversified Woodcrafts Wall & Island Bench - Lb-D2, 10"W Locker, Double Door
DW-MAD2-10L
This series offers 1-3/4" maple tops and 4 bench lengths and 3 locker styles to choose from. The all-welded, 1-section construction has reinforced side panels (20-gauge). Locker doors (18-gauge) have...
Hadrian 58" TP Door, Powder Coated, ADA
TP3258DH-VARI
Hadrian Powder Coated Steel Toilet Partitions are perfect for most installations where vandalism is at a minimum. They are easy to install and to care for. They are great as a new installation or as...