Need help? Click here or chat below, call us at 833-201-8186, or email help@shifflerequip.com


ADA Paddle Knob Set for Metpar, General Partition & Knickerbocker

TP 238
MFG Part #:


ADA compliant replacement latch cover knob set.
Material: chrome plated Zamak (pot metal)
Turn knob (male side)
Of outside rim: 1-19/32"
Inside rim: 1-11/32"
Paddle handle
Length: 2-3/4"
At top: 7/8"
In middle: 11/16"
At bottom: 31/32"
Width: 1/2"
There are two posts extending out of the inside face of the
turn knob, which snap into two holes on the escutcheon plate.
Middle post
Dia: 13/32"
Length, from inside face of turn knob: 1"
NOTE: There are two 1/16" horizontal grooves near the top of
each side of this post, which receive a 'C' clip that is on
the escutcheon plate.
Outer post
Dia: 15/32"
There is a nipple on the end of the outer post.
Length of nipple: /16"
Length of post, from inside face of turn knob, including
the nipple: 29/32"
Escutcheon plate (female side)
Of outside rim: 19/32"
Of inside rim: 1-11/32"
There are two holes, which receive two posts that are on the
turn knob.
Middle hole
Dia: 13/32"
Depth: 5/16"
Outside hole
Dia: 7/32"
Depth: 5/16"
NOTE: there is a 1/2" wide x 1" long x 9/32" high 'island' in the middle of the escutcheon plate that houses the above two holes. This island has a 1/16" horizontal groove running its parimeter, 1/1" from the top? A 1/16" steel 'C' clip fits in this groove and runs the length of the whole island on both sides. The groove and clip are designed so that the 'C' clip is exposed 1/16" inside of the larger middle hole on both sides. The middle post on the turn knob (male side) has a 1/16" groove running the parimeter of its tip. The exposed 'C' clip on the escutcheon plate snaps into the groove on the male tip. This holds the two pieces together.


Questions about ADA Paddle Knob Set for Metpar, General Partition & Knickerbocker?

Please contact us with any questions you have about ADA Paddle Knob Set for Metpar, General Partition & Knickerbocker and we'll be in touch.

Contact Us