×
×
"/>

Need help? Click here or chat below, call us at 833-201-8186, or email help@shifflerequip.com

Quickship
Hardware kit for Global metal Inswing door Global Specialties Shiffler Furniture and Equipment for Schools

Hardware kit for Global metal Inswing door

SKU:
TP GLOKITBE
MFG Part #:
8513500G
Add to Wish list

DESCRIPTION

Replacement hardware kit for Global baked enamel partitions.
This is a kit. Information is listed in the following order:
- Top hinge
- Top hinge pin
- Bottom hinge with pintle, lock washers and nut
- Bottom door cam
- Coat hook with bumper
- Turn knob: inner and outer
- Strike/keeper
- Hardware
Top hinge
Brand: Global
Application: Used on a 1-1/4" thick, round edged
metal pilaster and a 1" thick, round edge metal door
'A' Dimension (distance from back face of U-bracket
to center of hinge pin hole: 1-1/8"
This part consists of:
- A U-Bracket with holes for mounting to a pilaster
- A tongue with hinge pin hole and bushing
U-Bracket
Material: Chrome plated zamak
Material thickness: 7/64" (between 3/32" and 1/8")
Height: 2-3/16"
Width
Inside: 1-17/64" (between 1-1/4" and 1-9/32")
Outside: 1-15/32"
Depth:
Inside, at center: 31/32"
Outside: 1-1/16"
Mounting holes
Qty: 2 per fork
Dia: 9/32"
Hole to hole OC: 1-1/2"
Distance from back face of fork to center of hole: 7/32"
Tongue
Distance from back face of U-bracket to center of
hinge pin hole ('A' dimension): 1-1/8"
Height
At hinge pin hole: 1/2"
At face of U-bracket: 9/16"
Length, to front face of U-bracket: 1-5/8"
Width
At U-bracket: 1-1/32"
At hinge pin hole: 15/16"
Hinge pin hole
Including bushing: 13/32"
Not including bushing: 39/64" (between 19/32" and 5/8")
Bushing
Material: White nylon
Thickness: 5/64"
Top hinge pin
Style: The top end has a deep inside hole for inserting a
screw to back the pin out. The bottom is a smaller diameter
than the rest of the pin and has a snap-in locking tip.
Material: White nylon
Overall length: 3-15/32"
Upper portion
Length: 2-23/32"
Dia: 3/8"
Hole
Dia: 13/64" (between 3/16" and 7/32")
Length: 17/32"
Lower portion with locking tip
Length: 3/4"
Dia: 5/32" - 3/16"
Threads
Thread size: 10-24
Depth: 11/16"
Bottom hinge with pintle, lock washers and nut
Material: Chrome plated zamak
'A' Dimension (distance from back face of U-bracket
to center of hinge pin hole): 1-1/8"
The hinge consists of:
- A U-Bracket with holes for mounting to a pilaster
- A tongue with a pintle hole
U-Bracket
Material thickness: 7/64" (between 3/32" and 1/8")
Height: 2-3/16"
Width
Inside: 1-17/64" (between 1-1/4" and 1-9/32")
Outside: 1-15/32"
Depth:
Inside, at center: 31/32"
Outside: 1-1/16"
Mounting holes
Qty: 2 per fork
Dia: 9/32"
Hole to hole OC: 1-1/2"
Distance from back of fork to center of hole: 7/32"
Tongue
Distance from back face of U-bracket to center of
hinge pin hole ('A' dimension): 1-1/8"
Height
At pintle hole: 1/2"
At U-bracket: 9/16"
Length, to front face of U-bracket: 1-5/8"
Width
At hinge pintle hole: 15/16"
At U-bracket: 1"
Pintle hole
Dia: 11/32"
Distance from hole center to outer tip of tongue: 19/32"
Pintle - includes an internal and an external tooth washer
and a nut. It has a slanted upper nylon portion and a
lower threaded steel portion with an adjustment slot
at the tip
Material
Upper: Nylon
Lower: Steel, bright finish
Upper nylon portion
Dia: 21/32"
Height
At tallest point: 1-1/8"
At shortest point: 11/16"
Lower threaded portion
Overall length: 1-1/32"
Thread size: 5/16-18 x 9/16"
Adjustment slot
Width: 1/32"
Length: 7/32"
Depth: 3/32"
Upper external tooth washer
Material: Steel
Thickness: 1/32"
Diameter
Inside: 11/32"
Outside: 9/16"
Lower internal tooth washer
Material: Steel
Thickness: 1/32"
Diameter
Inside: 11/32"
Outside: 19/32"
Hex nut
Material: Steel
Size: 5/16-18
Outside drive: 1/2"
Bottom door cam - This item is:
- Square on the outside, has a rectangular base and outer tabs
on the outside that lock into the bottom door casting,
preventing rotation
- Round on the inside with a beveled ceiling that mirrors the
top of the pintle (see lower door hinge)
Material: White nylon
Material thickness: 1/8"
Overall height: 1-1/4"
Outside section
Upper square portion
Height: 1-1/8"
Width/depth: 27/32"
Lower base
Thickness: 1/8"
Length: 1-3/32"
Width: 7/8"
Locking tabs
Depth off surface of square portion: 7/64"
Width: 9/32"
Height from base
Side 1: 11/32"
Side 2: 27/32"
Inside portion
Diameter: 23/32"
Height
At tallest portion: 1-1/16"
At shortest portion: 5/8"
Coat hook with bumper - consists of a mounting plate,
straight upper hook with bumper and curved lower hook
Material: Chrome plated zamak with black rubber bumper
Mounting plate
Thickness: 3/32"
Width: 1-11/32"
Height: 2"
Mounting holes
Qty: 2
Dia: 7/32"
Hole to hole OC: 7/8"
Straight upper hook with bumper
Overall length, from back of mounting plate: 3-1/16"
Diameter
At mounting plate: 9/32"
At bumper: 9/16"
Bumper
Length: 7/16"
Dia: 9/16"
Curved lower hook
Hook dia: 1/4"
Inside dia of curve: 1-1/16"
Distance from the top of the curved hook to the bottom
of the upper straight hook
From the highest portion of curve: 5/8"
From the lowest portion of curve: 1-1/4"
Turn knob - consists of an inner turn knob and an outer
escutcheon plate
Material: Chrome plated zamak
Inner turn knob - female portion
Handle
Shape: Bow tie, with hole in the center for
shoulder screw (included - see 'Mounting Hardware')
Depth off surface of mounting plate: 15/32"
Outside dia: 1-19/32"
Diameter of door hole it fits: 1-1/4"
Diameter of center hole in bow tie handle: 9/32",
with a 15/32" cutout at the top for the head of a screw
Outer escutcheon plate (male portion)
Outer plate
Outside features
- All-American's name is stamped on it
- Emergency access slot
Outside dia: 1-5/8"
Diameter of door hole it fits: 1-1/4"
Overall thickness/depth: 13/32"
Posts - there is a tall, threaded center post with tension
spring and a short outside post with locking nipple
Center to outside post OC: 3/8"
Threaded center post
Length, from inside of outer plate
Overall: 7/8"
Lower portion only: 5/8"
Upper portion only: 1/4"
Outside diameter
Lower portion: 3/8"
Upper portion: 1/4"
Thread size: 10-24 x 1/2"
Outside post
Length, from inside of outer plate
Overall: 9/16"
Lower portion only: 7/16"
Upper portion only: 1/8"
Outside diameter
Lower portion: 11/32"
Upper locking nipple: 5/32"
Strike/Keeper - consists of
- A U-bracket with mounting forks and a face plate that has
a keeper hole
- A bumper plate, in-line with the forks
Material: Chrome plated zamak, with black rubber bumper
Mounting forks
Height: 1-3/16
Thickness: 1/8"
Inside length, in the center: 1-3/32"
Distance between forks: 1-9/32"
Mounting holes
Qty: 1 per fork
Dia: 9/32"
Distance from side edge of fork to hole center: 7/16"
Face plate
Thickness: 7/64" (between 3/32" and 1/8")
Height: 1-3/16"
Keeper hole
Shape: Rectangular, with radius corners
Height: 25/32"
Width: 15/32"
Bumper plate
Thickness, not including bumper: 3/8"
Height: 1-3/16"
Projection off front of face plate: 1-1/16"
Bumper
Shape: Doughnut
Outside dia: 25/32"
Inside dia: 11/32"
Thickness off plate surface: 5/32"
Mounting hardware is provided, and includes:
For the top and bottom hinges and the strike keeper:
- 5 Ea 10-24 x 1-1/4" Torx shoulder screw, zinc plated steel
- 5 Ea 10-24 x 5/8" Torx barrel nut, zinc plated steel
For the turn knob and escutcheon plate:
- 1 Ea 10-24 x 1/2" Torx shoulder screw, stainless steel
For the coat hook with bumper:
- 2 Ea #12 x 5/8" Torx tapping screw, zinc plated steel
Please note that if anyone is looking for the turn latch only, they can substitute part# TP 250/260. If they are looking for the keeper only, they can substitute TP 140.

SPECIFICATIONS

Questions about Hardware kit for Global metal Inswing door?

Please contact us with any questions you have about Hardware kit for Global metal Inswing door and we'll be in touch.

Contact Us

A United For Growth Company