×
×
"/>

Need help? Click here or chat below, call us at 833-201-8186, or email help@shifflerequip.com

Quickship

Jensen Swing Hanger W/ Pintle - For 3-1/2" O.D. Pipe, Stamped Galvanized Steel

SKU:
PSS25
MFG Part #:
SH127

DESCRIPTION

Stamped, galvanized steel, oil-less swing hanger for standard schedule 40, 3" pipe. Stamped steel hangers have more ability to bend so they will not snap when torqued too tightly. Some cast hangers can have failures. Includes pintel. Underside of hanger is knurled to prevent turning and slipage. National Test Lab rated at 5000 lbs. load strength.
Weight: 2.97 lbs
Size of pipe it fits: 3-1/2" Round
National test lab results: 5000 lbs
Grade: Commercial
Warranty: All Jensen's products are guaranteed against defects
in workmanship and materials for one full year from the date
of invoice. Naturally, they cannot be responsible for damage
resulting from vandalism, misuse, lack of maintenance or
incorrect installation.
Upper and lower pipe straps
Material: Galvanized stamped steel
Thickness: 3/16"
Width: 1-13/16"
Width between pintle attachment yolks: 1-1/8"
Bolt holes for connecting upper and lower pipe straps
Shape: Square
Size: 1/2" x 1/2"
Bolt hole to hole OC: 4-7/8"
Pintle
Material: Galvanized steel
Upper portion
Width: 15/16" (1" nominal)
Dia: 1-5/8"
Lower portion
Height
Inside: 1-1/16"
Outside: 2"
Width
Inside: 23/32"
Outside: 1-3/4"
Diameter of loop: 1/2"
Distance from top side of lower pipe strap
just above pintle, to center of pintle hole: 3"
Distance from center of pintle's upper swivel hole
to center of it's lower loop: 1-13/16"
Hardware for connecting upper and lower pipe straps
Qty: 2 each bolts, 2 each nuts
Bolt: 12mm Course x 35mm Non-slotted, round head carriage bolt,
galvanized steel
Nut: 12mm Course Hex nylon locking nut with 19mm drive,
Steel with chrome finish
Hardware for connecting pintle to lower pipe strap
Qty: 1 each bolt, 1 each nut
Bolt: 12mm Course x 55mm Non-slotted, round head carriage bolt,
galvanized steel
Nut: 12mm Course Hex nylon locking nut with 19mm drive,
Steel with chrome finish
Replacement pintle: PSS21-1

SPECIFICATIONS

Questions about Jensen Swing Hanger W/ Pintle - For 3-1/2" O.D. Pipe, Stamped Galvanized Steel?

Please contact us with any questions you have about Jensen Swing Hanger W/ Pintle - For 3-1/2" O.D. Pipe, Stamped Galvanized Steel and we'll be in touch.

Contact Us