R.C. Musson Rubber Co.
R.C. Musson 622 Series Rubber Stair Tread with Diamond Design - 48"L
- SKU:
- RC-62248
- MFG Part #:
- 622 48
FILES & RESOURCES
- Brochure:
- Download PDF
DESCRIPTION
RC Musson's 622 Series Heavy-Duty Diamond Design Molded Rubber Stair Tread is the original molded rubber design on the market. The diamond design is 6" deep and the smooth back area is 5-3/4" deep. The new adjustable nose tread will easily adjust and adhere to steps with return angle nosings between 90 and 60 degrees. This allows a good fit on stairways designed for safety and aesthetics. Use Musson #400 Neoprene Contact Adhesive or #110 Epoxy Nose Caulk for longer wear and added safety.SPECIFICATIONS
| General description | No. 622 Molded rubber stair tread |
| with diamond pattern design | |
| Brand | R.C. Musson Rubber Co. |
| Weight | 8 lbs |
| Carton quantity | None |
| Shipping note | Ships via UPS, FOB Akron, Ohio 44306 |
| Warranty | The R.C. Musson Rubber Co. warrants all rubber stair |
| treads against excessive wear for a period of five (5) years. | |
| Return policy | Merchandise may not be returned unless written |
| authorization is granted in advance. Items must then be returned | |
| freight prepaid, and a return handling charge will be assessed. | |
| Special size, special run, special color or custom made material | |
| are not returnable. A 36" tread is cut from a 72" tread and is | |
| therefore not returnable. | |
| Size | |
| Thickness | 1/4" |
| Depth | 12-1/4" |
| Length | 48" |
| Inside nose height | 1-1/2" |
| Depth of diamond pattern | 6" |
| Depth of smooth rear border | 5-1/2" |
| Material | Molded rubber |
| Backing finish | Sanded |
| Style | Half-diamond, half-smooth design |
| Nose design | Square nose is adjustable to fit 60-90 degree corners. |
| Specify square or round nose when ordering. | |
| Application | For use in commercial, industrial and institutional, |
| heavy traffic areas. Fits pan-filled, molded concrete or | |
| terrazzo steps. | |
| Qualities | Nose will easily adjust and adhere to steps with |
| return angle nosings between 90 and 60 | |
| Federal specification compliance | RR-T-650E, ZZ-T-001237 (GSA-FSS) |
| Recommended adhesives | |
| - No. 400 Solvent-based Neoprene contact cement | |
| - No. 560 Latex rubber flooring adhesive | |
| (not recommended where excessive moisture exists) | |
| - No. 110 Two-part epoxy nose caulk | |
| (for use with the ECD18 or ECD26 caulking guns) | |
| Recommended riser | 505-CR Molded rubber, coved |
| When ordering, specify | |
| - Color, from RC Musson's Color Series I, II or III | |
| (Curved nose is available only in Color Series I) | |
| Select 'View Color Chart' on this product page. | |
| - Round or Square nose | |
| - If you are butting treads end to end to cover extra wide steps | |
| you must so specify on your order, as exact shade and gauge | |
| cannot be guaranteed. | |
| Color charts and additional product information is available | |
| at www.mussonrubber.com | |
Questions about R.C. Musson 622 Series Rubber Stair Tread with Diamond Design - 48"L?
Please contact us with any questions you have about R.C. Musson 622 Series Rubber Stair Tread with Diamond Design - 48"L and we'll be in touch.
Related Products
prev
next
