Shiffler Equipment Sales, Schiffler Supplies

Adding to cart

Manufactured by KNICKERBOCKER PARTITION CORP.

ADA Paddle Knob Set for Metpar &  Knickerbocker

ADA Paddle Knob Set for Metpar, General Partition & Knickerbocker

Manufacturer Part Number: 6170
Sku: TP 238
Price: $11.73

Shipping calculator estimates the cost of delivery at the time of processing. Costs may vary depending on additional services requested and based on the destination and shipping method. For expedited shipping options and costs for additional services provided by freight carriers, please contact us at 800-547-1539.
ADA compliant replacement latch cover knob set.
  • Material: chrome plated Zamak (pot metal)
  • Turn knob (male side)
  • Dia
  • Of outside rim: 1-19/32"
  • Inside rim: 1-11/32"
  • Paddle handle
  • Length: 2-3/4"
  • Height
  • At top: 7/8"
  • In middle: 11/16"
  • At bottom: 31/32"
  • Width: 1/2"
  • There are two posts extending out of the inside face of the
  • turn knob, which snap into two holes on the escutcheon plate.
  • Middle post
  • Dia: 13/32"
  • Length, from inside face of turn knob: 1"
  • NOTE: There are two 1/16" horizontal grooves near the top of
  • each side of this post, which receive a 'C' clip that is on
  • the escutcheon plate.
  • Outer post
  • Dia: 15/32"
  • There is a nipple on the end of the outer post.
  • Length of nipple: /16"
  • Length of post, from inside face of turn knob, including
  • the nipple: 29/32"
  • Escutcheon plate (female side)
  • Dia
  • Of outside rim: 19/32"
  • Of inside rim: 1-11/32"
  • There are two holes, which receive two posts that are on the
  • turn knob.
  • Middle hole
  • Dia: 13/32"
  • Depth: 5/16"
  • Outside hole
  • Dia: 7/32"
  • Depth: 5/16"
  • NOTE: there is a 1/2" wide x 1" long x 9/32" high 'island' in the middle of the escutcheon plate that houses the above two holes. This island has a 1/16" horizontal groove running its parimeter, 1/1" from the top? A 1/16" steel 'C' clip fits in this groove and runs the length of the whole island on both sides. The groove and clip are designed so that the 'C' clip is exposed 1/16" inside of the larger middle hole on both sides. The middle post on the turn knob (male side) has a 1/16" groove running the parimeter of its tip. The exposed 'C' clip on the escutcheon plate snaps into the groove on the male tip. This holds the two pieces together.
Customer Reviews
(0.00)
# of Ratings: 0
There are no comments for this product.