DESCRIPTION
Round Plunger Door Holder with Bronze Finish.| Material | |
| Housing | : Brass, US10 Satin bronze finish |
| Plunger and platform lever | : Steel |
| Bumper | : Gray, non-marking rubber |
| Housing | |
| Height | : 2-13/16" |
| Width | : 1-1/4" |
| Depth | : 1-3/16" |
| Thickness | : 1/16" |
| Mounting plate | |
| Width | |
| At top mounting hole | : 23/32" |
| At middle of housing | : 1-1/4" |
| At bottom mounting holes | : 2-9/16" |
| Height | : 5-5/16" |
| Thickness | : 1/8" |
| Mounting holes | |
| Qty | : 3; 1 Each at the top of the mounting plate |
| 2 Each at the bottom of the mounting plate | |
| Dia | : 1/4" |
| Hole to hole OC | |
| Bottom hole to hole OC | : 1-15/16" |
| Top to bottom | : 4-3/8" |
| Plunger | |
| Upper half | |
| Foot platform | |
| Dia | : 3/4" |
| Thickness | : 3/16" |
| Post | |
| Dia | : 1/2" |
| Length, when bumper is fully retracted | : 2-1/2" |
| Lower half | |
| Dia | : 3/4" |
| Length, when bumper is pushed all of the way down, | |
| Including bumper | : 1-15/16" |
| Not including bumper | : 1-1/2" |
| Length, from top of plunger to bottom of bumper | : 5-5/16" |
| Platform lever | |
| Width | : 1-5/16" |
| Depth | : 1-1/6" |
| Thickness | : 3/32" |
| Bumper | |
| Shape | : Round |
| Diameter | |
| At top | : 19/32" (called 5/8") |
| At bottom | : 1-1/16" |
| Thickness of material that would be exposed | |
| when bumper is in holder | : 7/16" |
| Tread design | : Circular grooves |
| There is a recessed area in the bottom of the bumper | |
| for the head of the mounting screw to 'hide' when | |
| it is installed so that it will not touch the floor | |
| when the door holder is in the 'down' position. | |
| Dia of recess | : 9/32" |
| Depth | : 3/16" |
| Mounting screws | |
| Holder | |
| Qty | : 3 Each |
| Type | : #10 x 3/4" Phillips oval head sheet metal screw |
| Bumper | |
| Qty | : 1 Each |
| Type | : 8-32 x 1" Phillips round head machine screw |
| Operating information | |
| Distance of 'throw' - The distance from the bottom of the | |
| bumper to the surface of the floor when the post is | |
| fully retracted | : 1-1/4" |
| Distance between the bottom of the bumper and the bottom | |
| of the door when the post is fully retracted | : 1/8" |
Questions about Round Plunger Door Holder with Bronze Finish?
Please contact us with any questions you have about Round Plunger Door Holder with Bronze Finish and we'll be in touch.
Related Products
Quickship
Quickship
