Allegion
Wall-Mount Door Stop/Holder, Wood Mount, US26D, Satin Chromium Finish, Hardware included
- SKU:
- W20
- MFG Part #:
- WS20-US26D
DESCRIPTION
Heavy-duty Wall/Bumper Holder. Aluminum finish. Features a straight projection of 4" in the engaged position and a rubber tip. Hinged strike furnished with #W20, matches body material. For wood mount.| Material holder and keeper | : cast brass, US26D satin chromium finish |
| Bumper | : black rubber |
| Body | |
| Length | |
| To outside tip of bumper | : 39/16" |
| To wall side of catch | : 2-7/16" |
| Head | |
| Dia | : 27/32" |
| Length | |
| Including bumper | : 1-1/8" |
| Not including bumper | : 5/8" |
| Catch | |
| Height | : 1/32" |
| Width | : 7/16" |
| Depth, where it meets head | : 13/32" |
| Bumper | |
| Dia | : 27/32" |
| Amount of material exposed | : 1/2" |
| Shaft | |
| Dia at middle | : 1/2" |
| Length | |
| Between head and base, including hex area | : 2-1/4" |
| Between head and hex area | : 1-7/16" |
| Hex (there so the holder can be turned with a wrench) | |
| Width | : 3/4" |
| Length | : 1/2" |
| Distance between hex and base | : 5/16" |
| Base | |
| Dia | : 2-5/16" |
| Thickness | : 1/8" |
| Mounting holes | |
| Qty | : 2 each, 1 each exposed hole in the back 1 each concealed hole in the bottom center |
| Type | |
| Back hole | : countersunk |
| Center hole | : straight, 5/16-18 machine threaded |
| Dia of mounting hole pattern | : 1-3/4" |
| Ives does this by drawing a circle that crosses through the center of each of the three mounting holes and measuring the dia of the circle. | |
| Keeper | |
| Base plate | |
| Heigth | : 2" |
| Width | : 1" |
| Thickness | : 5/32" |
| Pivoting catch | |
| Width | : 1" |
| Length, from center of pivoting point | : 1-1/4" |
| Catch hole | |
| Shape | : rectangular |
| Width | : 9/16" |
| Height | : 1/2" |
| Mounting hole | |
| Qty | : 2 |
| Type | : countersunk hole to hole OC: 15/16" |
| At the bottom of the front of the base plate, below the lower mounting hole, there is a rectangular 'PD', raised off the plate's surface, which fits a rectangular hole on the pivoting catch when the keeper is not in use | |
| Width | : 9/16" |
| Height | : 7/16" |
| Thickness, or height off surface of base plate | : 5/32" |
| Mounting hardware | |
| Body | |
| 3 each #10 x 1" flat phillips head sheet metal screw | |
| 3 each plastic expansion shield | |
| Keeper | |
| 2 each #10 x 1" flat phillips head sheet metal screw | |
Questions about Wall-Mount Door Stop/Holder, Wood Mount, US26D, Satin Chromium Finish, Hardware included?
Please contact us with any questions you have about Wall-Mount Door Stop/Holder, Wood Mount, US26D, Satin Chromium Finish, Hardware included and we'll be in touch.
Related Products
Quickship
Quickship
Quickship
Quickship
