Quickship
DESCRIPTION
Ribbed non-marking rubber shoe is securely fastened to unit with a screw and is easily replaced when worn.SPECIFICATIONS
| Material | |
| Housing | cast aluminum with US28 satin aluminum finish |
| Plunger | steel top half, cast aluminum bottom half |
| Platform lever | Steel |
| Bumper | gray, non-marking rubber |
| Housing | |
| Height | 2-25/32" |
| Width | 1-3/8" |
| Depth | 1-3/8" |
| Thickness | 1/16" |
| Mounting plate | |
| Width | 1-3/8" |
| Height | 6-3/16" |
| Thickness | 5/32" |
| Mounting holes | |
| Qty | 2 |
| Type | countersunk |
| Hole to hole OC | 5-1/2" |
| Plunger - upper half is a round, steel post. | |
| Lower half is a square, aluminum post where it connects to the bumper plate. | |
| Upper half | |
| Diameter of floor platform | 3/4" |
| Post diameter | 1/2" |
| Length, when bumper is fully retracted | 2-3/32" |
| Lower half | |
| Width | 13/16" |
| Depth | 13/16" |
| Length, when bumper is pushed all of the way down, not including bumper plate | 21/32" |
| Length from top of plunger to bottom of bumper 5-11/16" | |
| Platform lever | |
| Width | 1-3/8" |
| Depth | 1-3/16" |
| Thickness 3/32" | |
| Bumper | |
| Shape | rectangular |
| Width | 3/32" |
| Length | 1-1/4" |
| Thickness of exposed material when bumper is installed | 7/16" |
| The top of the shoe is molded so as to form a rectangular platform, narrower than the rest of the bumper, but the same length. This 'male plug' fits into a 'female' cunterpart on the bottom of the plunger section of the door holder. | |
| Width | 11/16" |
| Depth | 1/8" |
| Height | 1/8" |
| Tread | |
| Type | four squared-edged treads running the length of the bumper width of each: 3/32" |
| Depth | 5/32" |
| Bumper mounting plate (attached to bottom of plunger) | |
| Outside | |
| Width | 1-11/32" |
| Depth | 1" |
| Thickness | 1/4" |
| Inside | there is rectangular recessed area on the bottom of the plate. The rubber bumper has a male rectangluar raised area that fits into this. |
| Width | 1-1/4" |
| Length | 3/4" |
| Depth | 1/8" |
| Mounting hardware (included) | |
| For door holder | |
| Qty | 2 |
| Type | #8 x 1" Phillips flat head sheet metal screw |
| For bumper | |
| Qty | 1 |
| Type | #8 x 3/4" Phillips flat head sheet metal screw o |
| Operating information distance of 'throw' - the difference of distance from the bottom of the bumper and surface of the floor when the post is fully retracted; 1-5/8" | |
| Distance between the bottom of the bumper and the bottom of the door when the position is fully retracted | 9/16" |
Questions about Replacement Tip for GJ1153M, screw included?
Please contact us with any questions you have about Replacement Tip for GJ1153M, screw included and we'll be in touch.
Related Products
Quickship
Quickship
Quickship
prev
next
