Quickship
Republic Storage Systems, LLC
Republic Storage Replacement Recessed Locker Door Handle Case
- SKU:
- RS-2007
- MFG Part #:
- 7137202
DESCRIPTION
Replacement recessed handle cup for Republic Steel locker.| Material | : brushed steel |
| Thickness | : 1/64", 21 gauge |
| Height | |
| Outside | : 5-17/32" |
| Inside | : 5-1/32" |
| Width | |
| Outside | |
| At top | : 3-15/16" |
| At bottom | : 3-5/16" |
| Inside | |
| At top | : 3-3/8" |
| At bottom | : 2-27/32" |
| Depth | : 1-1/8" |
| Front edge width | : 1/4" |
| There are four triangular shaped tabs behind the face trim, | |
| one behind each corner, which hold the cup in the locker door. | |
| Height of top tabs | : 1/8" |
| Height of bottom tabs | : 1/16" |
| There are two mounting holes on the inside bottom ledge onto which | |
| the number plate is mounted | |
| Dia of each | : 1/8" |
| Hole to hole OC | : 1-7/8" |
| There are holes on the back wall, into which a built-in combination | |
| lock is mounted | |
| Qty | : 3 each, 1 each large in the center, |
| 2 each small | : 1 above and 1 below the large hole |
| Dia | |
| Small hole | : 7/32" |
| Large hole | : 21/32" |
| Hole to hole OC | |
| Small hole to large hole | : 1-3/64" |
| Small hole to small hole | : 2-3/1" |
| Distance from bottom ledge to edge of bottom hole | : 5/8" |
| Distance from top ledge to edge of top hole | : 1-11/16" |
| There is a slot at the top of the cup into which the plastic trigger | |
| portion of the RS-2008-RH or RS-2009-LH lift fits | |
| Width | |
| At back wall | : 5/16" |
| At top ledge | : 9/16" |
| Height at back wall | : 29/32" |
| Depth at top ledge | : 1-1/32" |
Questions about Republic Storage Replacement Recessed Locker Door Handle Case?
Please contact us with any questions you have about Republic Storage Replacement Recessed Locker Door Handle Case and we'll be in touch.
Related Products
Quickship
Quickship
Quickship
Quickship
Quickship
