SALE
Jensen Swing
Swing hanger w/shackle, wrapless, For 3-1/2" pipe; stainless steel
- SKU:
- PSS126
- MFG Part #:
- SH126
FILES & RESOURCES
- Maintenance Sheet:
- Download PDF
- Safety Handbook:
- Download PDF
DESCRIPTION
These non wrap swing hangers have been redesigned with a smoother top to better meet protrusion regulations. These non wrap hangers help prevent swing chain from getting caught on top of swing sets and wrapping around the pipe. This is a safety issue that helps keep the stress from the chain and fasteners, and keeps the motion on the swing hanger, where it belongs. It helps the chain and fasteners from being worn prematurely from friction. These hangers can replace regular swing hangers without dismantling a swing set. They are made of galvanized steel and a nylon sleeve. 3 1/2 outside diameter and 11″ in Circumference. Tensile strength is 9960 lbs. Sold as each.| Material | |
| Inside two-piece bushing | : Black nylon |
| Outer clamp and shackle | : Steel, zinc finish |
| Inside bushing | |
| Material thickness | |
| Under clamp | : 1/8" |
| On each outer side of clamp | : 1/2" |
| On outside edges | : 1/4" |
| Width | : 4-1/2" |
| Inside dia | : 3-1/2" |
| Mounting holes | |
| Qty | : 4 each - 1 on each side at the top and 1 on each side at |
| the bottom; each pair of holes receives a single through-bolt | |
| Dia | : 1/4" |
| Side to side hole to hole OC | : 3-1/4" |
| There is a flat, round area around each bolt hole | |
| for the bolt head and nut to rest level against. | |
| Diameter of flat area | : 29/32" |
| Hardware for mounting bushing to swing set tube (included) | |
| Qty | : 4 |
| Material | : Steel |
| Style | : 10-24 x 3/4" hex washer head thread forming screw |
| Hex head dia | : 5/16" |
| Outer clamp | |
| Cylindrical portion that wraps around bushing | |
| Material thickness | : 5/16" |
| Width | : 1-7/8" |
| Lower clamping brackets | |
| Material thickness | : 7/16" |
| Distance from bottom of cylindrical portion | |
| to center for hole for shackle | : 5/8" |
| Shackle | |
| Material thickness | : 3/8" |
| Bolt to bolt OC | : 2-1/2" |
| Large end | |
| Inside width | : 15/16" |
| Inside length, to center of bolt holes | : 1-3/16" |
| Bolt | |
| Head | |
| Style | : Round hex with pin |
| Outside head dia | : 5/8" |
| Hex size | : 11/32" |
| Shoulder size | : 3/8" x 1-1/4" |
| Thread size | : 3/8-16 x 1/2" |
| Small end | |
| Inside width | : 15/32" |
| Inside length, to center of bolt holes | : 13/16" |
| Bolt | |
| Head | |
| Style | : Round hex with pin |
| Outside head dia | : 5/8" |
| Hex size | : 11/32" |
| Shoulder | : 3/8" x 15/16" |
| Threads | : 3/8-16 x 1/2" |
Questions about Swing hanger w/shackle, wrapless, For 3-1/2" pipe; stainless steel?
Please contact us with any questions you have about Swing hanger w/shackle, wrapless, For 3-1/2" pipe; stainless steel and we'll be in touch.
Related Products
SALE
Quickship
Quickship
Quickship
