Quickship
Republic Storage Systems, LLC
Republic Locker Door Complete Handle Assy, RH, 1962 to 1965
- SKU:
- RS-1107-RH
- MFG Part #:
- 700312
DESCRIPTION
Complete right hand handle assembly for Republic Lockers. Includes Housing (#RS-1197), Lift (#RS-1103) and screws.| Material | : zinc die cast, chrome plated |
| Lift | |
| Height | |
| Upper grip textured half | : 1-3/16" |
| Lower half | : 1-3/16" |
| Both parts | : 2-3/8" |
| Depth | |
| Upper half | |
| Including mounting prongs | : 15/32" |
| Not including mounting prongs | : 11/16" |
| Lower half | |
| Including mounting prongs | : 1-1/4" |
| Not including mounting prongs | : 19/32" |
| Width | |
| Handle portion | : 5/16" |
| Mounting prongs | : 5/32" |
| Grip style of the upper half | : |
| grip pattern of convex diamonds, 1/16" wide. | |
| There are flat platforms that lay between, and perpendicular to the | |
| handle portion and the mounting prongs, forming a base and stop | |
| for the mounting prongs. The flat platforms butt up agains the | |
| outside of the door then the handle is in place. The mounting | |
| prongs extend out off the platforms and each has a hole for | |
| mounting to the side of the lockbar. On the right hand lift, | |
| the prongs are closer to the left edge of the platform as the | |
| prongs are pointed away from you. This is how you can visually | |
| identify the handing if you are looking at the lift. | |
| Platforms | |
| Qty | : 2 each, 1 at the base of each mounting prong |
| Width | : 9/16" |
| Height | : 5/16" |
| Thickness | : 3/32" |
| Mounting prongs | |
| Length | |
| From base to end of prong | : 1/2" |
| From base to center of mounting hole | : 3/8" |
| Height | : 5/16" |
| Thickness | : 5/32" |
| Mounting holes | |
| Dia | : 1/8" |
| Type | : 8-32 threaded |
| Hole to hole OC | : 1-1/8" |
| Padlock hole dia | : 3/8" |
| Housing | |
| Thickness | : varies, from 1/32" to 1/8" around the different parts |
| of the housing | |
| Height | : 3-3/16" |
| Width | : wider at the top than the bottom |
| Base - wider in back than in front | |
| Front | |
| Top | : 13/16" |
| Bottom | : 9/16" |
| Back | |
| Top | : 29/32" |
| Bottom | : 5/8" |
| Kick-proof hood | |
| Front | : 15/32" |
| Back, where it joins base | : 1/2" |
| Lift slot | |
| Width | : 13/32" |
| Depth (open top of hood) | : 1/2" |
| Height (front of base) | : 7/8" |
| Mounting holes | |
| Qty | : 2 each - top hole is exposed, and accessible from the |
| front of back of the housing. The bottom hole is concealed | |
| on the front and accessible only from the back. | |
| Dia | : 1/8" |
| Hole to hole OC | : 2-7/16" |
| Amount of distance the prongs are from the left side of | |
| the platform as the prongs point away from you | : 1/8" |
| Amount of distance the prongs are from the right side of | |
| the platform as the prongs point away from you | : 9/32" |
| Padlock hole dia | : 3/8" |
| Mounting hardware | |
| For housing | : 2 each 8-32 x 5/16" Phillips head sems screw |
| For lift | : 2 each 8-32 x 1/2" Phillips head sems screw |
Questions about Republic Locker Door Complete Handle Assy, RH, 1962 to 1965?
Please contact us with any questions you have about Republic Locker Door Complete Handle Assy, RH, 1962 to 1965 and we'll be in touch.
Related Products
Quickship
Quickship
Quickship
Quickship
